Best low cost speaker cables for my system?

Here's a second for Speltz Anti-Cables. Most assuredly not the best, but for the money a contender. My runs are 25' and Speltz shipped it to me as a 100' spool that I cut and terminated with the supplied spades. I think I spent much less than most commercial preterminated would.

In my room, the cables do not pick up radio free Sacramento or any other nasties that my 96+dB speakers would surely spit out if they were there.

As a plus, if they don't work for you, snip the terminations off and you can make your own ic's or sell it as bulk here on the 'gon.

Enjoy.

Tvad: Jeff At Value Audio states that the combined guage of the DH Q10 is 10, hence the designation, Q10. As I'm not a do-it-yourself-er, my tendency is to go with the Q10 rather than buying bulk cable and terminating it myself. The Q10 seems to address the concerns Sean brought up about long cable lengths, plus it's well reviewed and within my budget, and I trust Jeff. The salesman at AudioFX in Sacramento, where I bought my system, did not believe the lengths of speaker cable required by my room were inherently problematic, by the way. Many thanks to all for your suggestions-- Audiogon rules!

06-23-06: Stuartk
Tvad: Jeff At Value Audio states that the combined guage of the DH Q10 is 10, hence the designation, Q10.

That's what I suspected.

Ramelectronics.com sells terminated lengths of Canare 4S11 with spades, bananas, and with various grades of WBT connectors. Long lengths. Short lengths.

It might be worth your time to look at the webpage and compare the prices.

Stuartk, I will not comment on all of the suggestions brought up other than the Q-10 which I am using. I am sure all all are good suggestions. The DH wire is a good value and it stopped me from searching for something better. Let us know what you end up with and how it performs.

Glad to hear you settled on the Q10's ...they are a bargain and should take your system to whole new level.