Crazy: Congratulatons to your Gyro SE. I might have to wait a little longer to upgrade my Tecnodec to a Gyro....
My DL103 has an output of 0.3mV, for which I used the 63dB setting on my Dino stage (actually the lowest MC setting the Dino has). The 70dB setting was too much in my system. What also made a small difference in loudness was changing the loading impedance from 100 Ohm to 1 kOhm. I don't know what other people use as their setting so it was good in my case that I could play with different ones. From my limited experience I would say 60dB is enough for the 0.3mV Shelter
Might be worth starting a new thread to see what amplification and loading other people use for the Shelter 501. By the way, Crazy, are you considering the new Shelter 301 as well? I am hoping that some people will try it out and report in a thread.
Rene
My DL103 has an output of 0.3mV, for which I used the 63dB setting on my Dino stage (actually the lowest MC setting the Dino has). The 70dB setting was too much in my system. What also made a small difference in loudness was changing the loading impedance from 100 Ohm to 1 kOhm. I don't know what other people use as their setting so it was good in my case that I could play with different ones. From my limited experience I would say 60dB is enough for the 0.3mV Shelter
Might be worth starting a new thread to see what amplification and loading other people use for the Shelter 501. By the way, Crazy, are you considering the new Shelter 301 as well? I am hoping that some people will try it out and report in a thread.
Rene