What type of copper is best for power cable?

You will have a very difficult time finding female re-wireable IEC connectors. Most of the mainstream manufacturers such as HUBBELL, Pass & Seymore etc, do not manufacture them. Several are available though. They are manufactured by Schurter, Marinco/Wattgate, Furotech and also NEOTECH. The least expensive of these is the Schurter, however it does not lend itselt to large gauge cables, so most manufacturers use the much more pricy
Marinco/Wattgate. in order to simplify assembly.I supply some of these connectors to a number of manufacturers
in the industry. If any audiogon members have questions about IEC or need a source for these and other connectors thay can contact me directly via e-mail at audioparts@bellsouth.net. Hope the information helps.

Stu

I recently looked into this issue and determined that solid copper is the way to go by asking questions to a local cabel manufacturer

Solid core copper, 11 ga or lower, teflon insulated & cryogenically treated.

JenaLabs.com sells many AC parts including Marinco and Hubbell IEC connectors, outlets, plugs, etc., all of which are cryogenically treated.

As to the solid core verses stranded, I prefer solid core for most apps, but as with most everything else in audio, you should encounter equally committed enthusiasts on both sides of this issue.

I know that Virtual Dynamics carries solid core 10, 12, and 14 gauge cryo treated house wiring at reasonable prices.

Last week, I installed just one Jena Labs 20amp cryo-treated Hubbell IEC connector on my passive in-line conditioner to my amplifier. After a 48 hour burn-in, the improvements were far greater than I anticipated. In fact, I've already submitted an order for more cryo-treated IECs, plugs, and outlets.

-IMO