"Slam"--what is it, is it really accurate?


I put this question under speakers because I assume "slam" is mostly a function of the speakers, but perhaps a certain level of amplification is required. The only places I have experienced slam is listening to certain demos at audio shops, and some live music. Most speaker demos I have heard over the years did not produce slam.

So, what mostly accounts for a system producing that "slam" you can feel in your chest? Is it that certain speakers are "voiced" with a mid-bass hump that causes it? Do they EQ the signal to produce it? Do they employ super powerful amps?

Secondly, how accurate is slam? How much of a goal in speaker selection should the ability to produce slam be?

The reason for the questions is that I am getting close to being in the market for new main speakers. My current amp is a McCormack DNA 1, BTW. Thanks for any info!


mtrot
No doubt slam is a more common element mixed into many (not just pop/hip/hop/electronic genre) more modern recordings, many of which sound very good, but only when the playback is up to the task.

Its noticeable in most well recorded CD from mid 90's on. That's about the time where I have read some fundamental standard EQ changes (for the better) were implemented in teh recording industry. ALso coresponds with the start of teh infamous "loudness wars". These days CDs are much louder (hence more "slam") so the game has changed. OF course many pop recordings targeting getting attention from the masses are overdone and are sonic atrocities in many ways, but many more are not and done quite well albeit at louder levels overall on average than in early years of CD.

So this gives recordings a bias towards "more slam" compared to many live experiences, but that'snot to say slam does not occur in live performances both acoustic and electronic as well, as noted above.

"Inefficient" systems will have more trouble delivering louder recordings with more slam well in general. EIther more efficient amps, more efficient speakers, or perhaps even both are the tickets to getting to a good place in regards to a playback system being able to deliver all the goods in any recording, for better or for worse.

Luckily, I am finding more sonically great moments when I listen to recorded music these days than ever before in my 50+ years, in recordings of all types both old and new. So hopefully, that is a good omen in general.

"Slam" done well has always been a sell point for many of the best "audiophile" recordings over the years.

Nowadays, its a lot more common, for better and for worse, and not so novel. You do not have to buy a special "audiophile" recordings in many cases to get it done well. Off course it is also often "overdone" as a selling point as mentioned. THat's entertainment! Nothing new there with teh entertainment industry overdoing something and even beating it to death regularly.
Performance dynamics are the door to "slam." (inadvertent pun alert) System capabilities aside, if performers are capable or even aware of dynamic contrast they can use it as a tool to get more mojo and emotional impact from the music. I don't like much monodynamic music, which a lot of popular stuff turns seems to be. Without space and some dynamic breathing it just sounds like yelling or something you need when hammered in a Euro disco at 4 AM. When I first saw Led Zeppelin in 1969, the technology available for PA systems (usually a pile of Altec A7s) wasn't allowing the ear splitting levels that soon (very soon) became the norm, but good ol' Zep cleverly used the dynamics of soft and loud to make it all more powerful, and it just seemed loud and good. I can't listen to Arcade Fire or Black Keys or most other modern pop stuff for this and other "geezer based taste" reasons, as many musicians and producers are clueless (or lack the desire to care) about dynamics, without which "slam" becomes "drone-like thumping" and sends me back to jazz.
Audiophile axiom - It's a lot easier to get slam in a headphone system than it is in a speaker system.
Thanks much for all the replies. I'd like to ask if you think my McCormack DNA-1 has the cojones to produce slam with reasonably efficient speakers? I think it is rated at 150 watts/channel into 8 ohms, and 300 watts into 4 ohms. My speakers are the(fairly old now) Legacy Audio Signature II, which are supposed to be very efficient, but I have never found them to produce significant slam on drum shots, or be all that dynamic on transients in general.

What I don't have a clue about is whether the Signatures are capable of slam/dynamics given a much more powerful amp, or if I would benefit more from a new/different set of main speakers. Any thoughts much appreciated.
"What I don't have a clue about is whether the Signatures are capable of slam/dynamics given a much more powerful amp"

Looking at specs of SE version of your Legacy speakers (can't find same for IIs), and assuming they are similar, I'd say, yes they should definitely be capable of "slam" in most rooms if in good working order.

I'd also say that given the power recommendation from Legacy for SE version, assuming similar to yours, of up to 300 watts, a bigger and beefier amp would yield additional dividends in the slam department.

Most vendors underrate the maaximum power handling of their speakers in order to play it safe and so as not to scare off buyers, but in general, I would tend to throw the kitchen sink amp power wise at speakers like those. A good quality 500 w/ch into 8 ohm Class D amp is what I would try. I landed on mine for my big OHM speakers for exactly the same reason. 250 w/ch Class D should deliver nice dividends as well.

I use my 500w/ch Class D amp even with my tiny similarly efficient Triangle Titus monitors, along with all my larger and more power hungry models.

As long as you listen to your ears for any signs of stress or breakup with more challenging recordings at a particular volume before going louder, you are not likely to damage most good quality speakers that are in good condition.

Your more likely to damage a speaker by blowing a tweeter if you attempt to crank up an underpowered amp too high and clipping occurs.

More power keeps clipping out of the equation. That creates dynamics and slam and is also easier for most good speakers to digest to boot.