Graham phantom MK2 /. Simon Yorke S10

On the mount, it depends on the table you have. The Graham mount is physically smaller, which allows the arm to be mounted on a wider variety of tables. I also found it very easy to install and set up.

Arm length also depends on the table, but is also a cartridge compatibility concern and personal preference. Other forums have a world of info on the merits (or lack thereof) of long arms. For my application, the 9 inch arm was the way to go.

Have fun & good luck!

I had all Grahams in all lengths, the best one is Standard 9" with Graham mount. All mounted on the same table, used with same cartridges and compared / controlled each one to correct geometry, best tracking results with various pressings.

Thanks for all.
Ok Syntax
I go to Graham phantom 9 with graham Mount.
Which Cartridge?

Thank you again

I have an SME V armboard. Will the Graham SME mount mate to the SME V's mounting holes? I tried asking Graham but no reply.

Rilou,
the Phantom works very well with a wide range of cartridges. Are there some you are interested? An excellent combination for example is Zyx Universe ...