What did Jeff Rowland mean by a "new module?"




A couple of years ago, I sent a Consonance preamp to the
Rowland Group to be checked out. Jeff got on the phone with me (I know I did not deserve his personal attention) and said he put a "new module" in the Consonance--and this module would bring my older preamp up to date.

What is "the module?" Electronics? How did a new one bring this older piece of equipment up to date? Thanks.
audiogal2
Years ago I had a Coherence II preamp and one module kept going bad. It's like Guidocorona described, a plug in circuit encased in epoxy.
As Dazzdax said it's the gain stage for the preamp.

The Consummate and Consonnance both had plug-in modules for the gain stage. Over time these modules do fail and need to be replaced. Depending on the vintage you're dealing with the modules may or may not be potted in epoxy resin.

If you look at the photo of the Consummate on the Rowland website you can see the modules.

http://www.jeffrowland.com/img/Consummate-front.jpg

The pre-amp section is furthest back in the photo and the "modules" are the large black rectangular boxes mounted to the board.

By "up to date" he likely meant that you now have the most current revision of the module that was replaced and that the unit is within spec. It doesn't mean that he integrated any new technology. In other words, he didn't change your unit into a Concerto or Synergy...