2. amps-preamps
  3. 1183917304

Shindo and synergistic components

I know many Shindo enthusiasts are in for the whole system - pre/amp/speakers. But for those with just a preamp from Shindo, what amps are you using with it? I'm particularly interested in higher power amplifiers (ie 60wpc +).

Or if there are owners of the Shindo Sinhonias (40wpc I think) - what speakers are you using?

I'm considering their pre amps, but their power amps may be a touch short of the power I'd like to have, so I'm exploring synergistic high power amp matches with the Shindos. The preamps being considered are the Monbrison or the Masseto.

Cheers
hatari
streetdaddy
349 posts
 
Aronsss,
What exactly does the Auditorium 23 transformer do? Is this the same as the Shindo transformer?
rchau
43 posts
 
The A23 transformer is a phono step-up transformer. In this case, the one Aronsss uses is the one optimized for a Denon or EMT cartridge. The stock transformers in Shindo preamps are optimized for use with the Shindo modified SPU or other really low impedance cartridges. I owned the A23 transformer for a about a month and it was fantastic with an EMT JSD5 cartridge.

Shindo makes an outboard step up transformer called the Arome. Similar concept but also optimized for an SPU.
lokie's avatar
lokie
511 posts
 
Anyone know the price of the Shindo modified SPU? It would be cool if you could put this cartridge on a resonable priced arm and table (say sub $4,000 all in) which would have similar sonic qualities of the Shindo Garrard 301. Anyone try to build a poor mans SG 301?
rchau
43 posts
 
The Shindo SPU is $3250 and a rebuild from an existing SPU-A s $2850.

The Shindo SPU uses a standard Ortofon mount so any arm with an Ortofon bayonet should be able to mount the cartridge. You must bear in mind that the SPU-A mount is shorter than the SPU-G. You may have to modify the arm mounting to get the right overhang on mnay set-ups.

Also, Shindo is probably going to stop selling complete Shindo SPUs without a Shindo 301 table. The SPU-A bodies are getting scarce. Ortofon will stop making SPU-A pretty soon. I have my order in for the last run. You can however acquire a SPU-A body and have Shindo rebuild them into a Shindo SPU.
hatari OP
94 posts
 
I started this post b/c I was looking for a higher powered amp than Shindo makes. As Rchau correctly pointed out, the new Corton Charlemagne 80 (75wpc) solves the problem.

I bought the Masseto and the Corton Charlemagne 80! Delivery in a few weeks. I do believe in synergy, so it was only to address the "power" issue that I sought alternatives. I decided against the Shindo/Garrard 301 - and went with a Raven AC. I will have two arms set up on that in time - one more modern (Phantom etc.), one with a more "Shindo-esque" feel to it (Mersault, EMT 997), both with appropriate carts.

Cheers and thanks for the discussion.
More to discover