Silent Running Audio vs Minus-K under tube amps


Has anyone had experience comparing the results of isolating tube amps with Silent Running Audio platforms versus using an isolation platform such as a Minus-K (or similar). I recently placed a Minus-K BM-8 platform under an non-suspended high mass turntable and was amazed at the improvement in the sound. I am trying to decide if the Minus-K would work as well for tube amps or would the Silent Running Audio Ohio Class platforms be a better choice. I have the amps on Grand Prix Monaco stands with the Formula carbon/kevlar shelves but I can feel significant vibration getting to the amps from the sub-woofers in my speakers (Vandersteen 5A's). The amps are sitting within a foot of the speakers due to short speaker cables. Thanks.
bomer
Hi Atmasphere, I would also think that this would greatly benifit any tube gear placed on top also, I was pleasantly surprised with my findings.

Your thoughts in relation to this.
I guess my worry with placing amps on complete isolation stands is the thought that very few amps are "voiced" on isolation stands. It seems that amp designers will create a amp and then "tweak" the circuit/materials with listening tests to get the final design. It would not be surprising if Lamm uses SRA bases for his final testing of his amps (though I have read that he designs amps by theory and less by listening) and therefore would know that optimal performance of the amp can be reached using a specific base.

Some folks on Audiogon have commented on other threads that they prefer certain passive stands over active isolation stands for amps (the sound can be less 'lively' with active isolation). Perhaps whatever vibrations (or micro-vibrations) that are getting into the amps are "helping" the overall sound of the amp.

I replicated Dev's "tapping" experiment with my turntable and Minus-K platform. I have the same results as Dev

The Minus-K is an amazing piece of equipment. Turntables clearly benefit from isolation (perhaps almost complete isolation). I would love to be able to "audition" a Minus-K under each tube amp prior to purchase.....but that can't happen
It is impossible to mechanically over-damp audio equipment (I am not talking about electrical damping).

If you are of the opinion that this is not the case, then its likely that you are used to dealing with synergistic effects which is usually not a good way to set up a system.

Now it is possible to put so much damping product on a tube that you can damage the tube by overheating it, but this is an issue of heat rather than damping.

Let's say you are compensating for a brightness by using dull equipment elsewhere. The result may be an even tonality, but one that is lacking transparency and detail. You are much better off if the equipment stands on its own merits and lacks coloration on its own.

This is why a good stand for amplifiers or for the front end of the system is a good idea- the less vibration you have, the greater the ease that the gear can realize its musical potential.