I LIKE that idea. If the wall voltage sags...badly, that'd do it.
Try a SINGLE channel at the offending level.
Borrow / buy a DVM and check line voltage during use. A 'Kill-a-Watt' meter would work, also. As long as you're on the same leg of the circuit as the amps, you'll be OK.
The Pass site also formerly listed output voltage of the amps, which would be another possible check.
Try a SINGLE channel at the offending level.
Borrow / buy a DVM and check line voltage during use. A 'Kill-a-Watt' meter would work, also. As long as you're on the same leg of the circuit as the amps, you'll be OK.
The Pass site also formerly listed output voltage of the amps, which would be another possible check.