Speaker placement for brightness control.


I've been involved in several threads involving, among other subjects, my near preoccupation with controlling shrill sounds. I have a hearing issue called hyperacusis which makes me very sensitive to certain frequencies and dB levels. I've tried many things such as changing speakers, amplifiers, interconnects, speaker wires and added DACs and experimented with speaker toe in.

These changes did not solve my problem in any a way noticeable except for a tube DAC between the two CD players and the amp.

THEN, we remodeled the listening room ( living room) adding a large area rug over the wooden floor which I think helped a little. I was also forced to raise the bookshelf speaker pedestals about 10" in order for the speakers to fire over some newly placed furniture. Although this places them well above what I've seen is recommended, the improvement is quite noticeable even for me.

This may seem like an unorthodox approach to reducing brightness and in this case it was accidental and I possibly compromised some other aspect of listening. However, I'm leaving it this way.

One thought that comes to mind is that the tweeters are now directed about a foot above my ears and not directly in line with them. I wouldn't recommend this to anyone else and am not even entirely sure that some of this is not just in my head. Any responses / opinions will be appreciated.
128x128broadstone
Right on Timo62, my next step is a soft dome tweeter. BTW, hanging the tapestry on my rear wall was such a significant improvement in trapping high frequencies.
Thanks again. I'm not seeing anyone for treatment as the two specialists that I saw (an audiologist and an otolaryngologist ) basically said that the treatment for either tinnitus or hyperacusis is learning tricks to deal with the condition. Both seem to agree, which is consistent with what I've found on the Internet, that these conditions are often associated with hearing loss. The audiologist designed a pair of hearing aids for me but I'm afraid the the resultant increase in volume may exacerbate the frequencies that cause problems and I don't want to experiment at a cost of approx $6500 a pair. Ironically, my hearing drop off seems to occur at around 5000Hz, the very frequency that I think is where my sensitivity starts.

One solution that was offered was ear devices that generate white or pink noise to mask the tinnitus; that just seems unacceptable on its face.

Low rider, I think I remember that you responded on another thread to someone with a similar issue but I don't remember the specifics. I think it was in reference to a question regarding the use of equalizers. As a last ditch effort to throw more equipment at the problem, I'm considering trying one and am curious to know whether you've tried or even recommend this approach. One way or the other I'd like to know whether a graphic or parametric equalizer would be best for the purpose. I've never dealt with any kind of equalizer control in 50+ years of listening and know very little about them.
Broadstone, yes I was part of a EQ thread but cant find it. Basically the recommendations were only add it if being used in the digital domain. If it's in the analogue chain, then there's more processing being done, noise being added, possible change in imaging and soundstage and buying more ICs.
I've worked in recording studios (analogue) and you would need to spend some $ to get professional results at home. Plus the result would be attenuating already compressed frequencies on the recording.

Look in the archives. I found lots of pros and cons on adding an EQ to the system. Many users are using EQ to balance their rooms, some using it for the reason we're talking about. (there are also some recommendations of good EQs; I think in the $1000 range)