Are film capacitors directional?

At the defense electronics company where I spent my career, in the forms that were used to report the results of investigations into test failures or other equipment problems there was a failure category entitled "operator error." That category was frequently applicable, despite the strong qualifications of those performing the tests :-)

I can't get through to the Gardner Bender site either, but it seems evident looking at the photo that for AC volts only 500V and 200V scales are provided. I don't know how many digits are provided, but yes, it seems a safe bet that the meter isn't sensitive enough.

Being a dedicated audiophile isn't easy ...

Best,
-- Al

Operator Error? Write 'em up.

I wrote more PDRs than the law allows. (Process Deviation Report) and even dinged some supervisors who were NOT certified on the process they screwed up.

If you plan on getting serious about your electronics: Bite the bullet, and buy a Fluke(http://www.ebay.com/itm/Fluke-114-True-RMS-Multimeter-/250994535268?pt=LH_DefaultDomain_0&hash=item3a7070ab64). The 114 will resolve down to 0.1mV. I've had my Fluke 6020B forever(well, way over 25 years anyway), and never had the first problem with it. Of course; now Fluke is made in China also, BUT- automatically selects for AC/DC =;^) (http://support.fluke.com/find-sales/Download/Asset/2634055_6116_ENG_B_W.PDF). I just bought the same one for my son at Grainger, and BOY did I get screwed on the price. Double what they sell for(new) on eBay(he was in a hurry, and it was the weekend). This one is more versatile, also reading mA(nice, if you get into tubes), and capacitance: (http://www.dealextreme.com/p/fluke-17b-2-6-lcd-digital-multimeter-meter-2-aa-included-28659)

2x on the fluke.
We had one at work....model# unknown, but we had to reliably measure 8mv with several digits left over.....and this one did with great accuracy and repeatability......Our spec was 8mv +-.001

Hi Al,

I borrowed a Fluke 115 from a friend. Here is the owner's manual. I tried the procedure again, and again I got confusing results. I think I should seek medical assistance for a severe multimeter learning disability.

At the risk of testing your considerable patience, can you try to walk me through this?

Bryon