uh huh...I'm not the master, just the slave but even I know when the master has been drinkin a lil too much ;)
Tweak you gotta try. Post your results...
Well I read some reviews about the new High Fidelity cables that were designed by the former owner of Virtual Dynamics. They seem to be using magnets as their claim to fame in their design.
I happened to have some rod type axially magnets that were about 3/8" in diameter and about 1" long. I installed 2 of them near the end of my speaker cables near the speakers. 2 sets are needed for each speaker wire left and right).They are installed so that the magnetism is pulling through the cable.
It is quite interesting, but I would like some others to try this and share their opinions before I comment.
I also added a set at the Amp end.These magnets cost about $3.39 each and you will need at least 4 of them or 8 if you want to try them also at the Amp end.
I bought mine from http://www.amazingmagnets.com/show-fractional-r1000c.aspx
Make sure you select USPS for about $4.95 shipping otherwise you will end up paying for UPS at about $13 for shipping.
I happened to have some rod type axially magnets that were about 3/8" in diameter and about 1" long. I installed 2 of them near the end of my speaker cables near the speakers. 2 sets are needed for each speaker wire left and right).They are installed so that the magnetism is pulling through the cable.
It is quite interesting, but I would like some others to try this and share their opinions before I comment.
I also added a set at the Amp end.These magnets cost about $3.39 each and you will need at least 4 of them or 8 if you want to try them also at the Amp end.
I bought mine from http://www.amazingmagnets.com/show-fractional-r1000c.aspx
Make sure you select USPS for about $4.95 shipping otherwise you will end up paying for UPS at about $13 for shipping.
- ...
- 55 posts total
- 55 posts total