benjie
Responses from benjie
| TTW Parts I am using these o-rings with my copper platter Momentus TTW turntable. They are very close to the clear ones that were an option with the rim drive set up. I have had a lot of success with them. They are very quiet and last a long time. I see peo... | |
| High Fidelity Cables MC 1-PRO I recently added 2 MC-1 Pros to my system. WOW, what a difference they made. I agree with a post above (tgun5) that HFC is kind of underplaying the significant effect they will have on a system. I am not a new comer to the magnets, I have a full s... | |
| To Graham Phantom Owners - Request for Help Is the DIN connection up against the plinth or the arm pod for the tonearm, not allowing the arm to raise any higher? | |
| Kirmuss audios ultrasonic record cleaner @tooblue After the cleaning process is completed with the US cleaning machine, I let the records air dry. Once they are dry, I place a record on the VPI and I apply a generous amount of clean water (distilled water) to the record surface and sprea... | |
| Kirmuss audios ultrasonic record cleaner I just let the records air dry after the cleaning cycle, it takes about 15 minutes for the records to dry. I set the records at a 45 degree angle with the block that is provided with the I-Sonic. They just drip dry over the tank.I also do a clean ... | |
| Kirmuss audios ultrasonic record cleaner I am not sure which I-Sonic cleaner you are looking at in your statement above but I-Sonic does make a cleaner for vinyl records. Here is the link to Amazon.https://www.amazon.com/iSonic-P4875II-4T-MVR-Motorized-Ultrasonic/dp/B077HP494C/ref=sr_1_1... | |
| Thumbs up for ultrasonic record cleaning No idea why they would have the temperature that high. The Kirmuss unit does not have heater at all. As for the 35 khz, most units designed for vinyl are between 35 and 40 khz, klaudio and audio desk are good examples. There is a lot of debate on... | |
| Thumbs up for ultrasonic record cleaning I don't have a Kirmuss US cleaner, I have an Isonic Motorized US Vinyl Cleaner. From the pictures that Kirmuss provides it appears that they are using an Isonic US system with their own top to hold the records. The Isonic Vinyl system is an excell... | |
| Speaker Cable Burn in Companies I would like to thank all of the members here for their support, emails and messages. Brad Greenspan aka bradster56 still has not responded and I doubt that he will. He has given me all kinds of excuses over the last 6 months on why he could not p... | |
| Speaker Cable Burn in Companies Send the cables to me, I'll burn them in for you. My price is very reasonable. | |
| Speaker Cable Burn in Companies Since you have money for new speaker cables, why can't you pay me the $50 you owe me since August of 2016 ? |