edwyun
Responses from edwyun
SUT shootout I think most people would say that getting the outpur voltage correct is more important with an SUT than getting the source or load impedance correct. Proof is in thr listening. I hope SUT manufacturers all have a robust return policy for this r... | |
Phoenix Engineering Falcon and Eagle After I got the Eagle and RR, I tested my setup, (1) without the Eagle and RR, (2) with only the Eagle AC regeneration, and (3) with the Eagle/RR feedback correction.What I found was that the stock motor (VPI Scout II) was inherently stable to 33... | |
Confessions from a VPI owner of some 30 years If your check the VPI forum, note that they are closed for the holidays. So be a little more patient. | |
SUT shootout SibeliusExcellent thread. After spending much time with the blue CineMag and the HM7, how do you feel about them today? Thanks for helpong me decide. | |
Any options for low power class A amps? The Nelson Pass Amp Camp is an easy build and sounds great for what it is. But you need a high efficient speaker (> about 93 SPL) to get the full effect with the ~6watts. | |
VPI TNT Turntables That plus all the tubes, pumps, etc. | |
VPI TNT Turntables oh because the platter speed changed!By the time you realize it, or your feedback system realizes it to try to adjust for it, it is too late. An adjustment can "adjust" for it after the fact, but it will not really "correct" it. The cat (or error... | |
VPI TNT Turntables >FYI, a properly designed speed controller will provide excellent instantaneous>speed stability, but long term speed accuracy is improved with feedback. Can you perhaps recommend one? =) | |
Jeff Rowland Amplifiers They sound great IMHO. But more opamps are being used in current designs - at least in the preamps. | |
Preamplifier for Threshold 400A As an aside, I use a Rowland Capri preamp that has XLRs, but I still use RCAs to my Threshold SA/6e amps. Unless you are using really long runs of cable, it should not matter XLR or RCA. | |
Preamplifier for Threshold 400A Yup, had an ARC years ago and due to impedance mis matching could not use the XLRs from the ARC to the Thresholds. I’d stick to using RCAs as the Thresholds are not differentially balanced. Still rock nonetheless. | |
Reel to Reel uses - I record CD and vinyl onto 1/4" tape at 15ips. Sounds much better. I reserve it for something special though. | |
B&W 803D crossover caps Um, why not go to active crossovers and get the most control of the drivers and how they sound? A lot easier than the "black arts" of trial and error using different caps. | |
Jeff Rowland Capri S2 Owners Manual Thanks all - especially for the manual, G! | |
Jeff Rowland Capri S2 Owners Manual Guido:Not sure how to send a PM via AGon. If available, you can email me at edwyunfb@yahoo.com Thanks!Ed |