To confirm whether reducing preamp gain will help, you can do a quick test by using SE (RCA) output from Ref 2, if you are using balanced IC right now. The Ref 2 SE output (12db) has a lower gain then balanced (18db). However, if you have in-line attenuators, you can place it in between preamp and power amp to confirm it as well. It's working on my system (Pass X-600+ARC Ref 2 MK1) to reduce the noise floor (humm) quite a few. Hope this helps...
ARC Reference 2 MkII Preamp white noise levels
Hi,
Just acquired a Ref2 MII preamp. The level of white noise is much higher than my BAT VK-50SE. It does not change with volume setting and is definitely not the amp noise. By muting and unmuting the preamp, you can discern the difference. The noise is quite audible from the listening position 8 feet away. For those who have this preamp, is the noise characteristic? Could it be the tubes? The difference between the BAT and ARC is remarkable. Thanks- William
Just acquired a Ref2 MII preamp. The level of white noise is much higher than my BAT VK-50SE. It does not change with volume setting and is definitely not the amp noise. By muting and unmuting the preamp, you can discern the difference. The noise is quite audible from the listening position 8 feet away. For those who have this preamp, is the noise characteristic? Could it be the tubes? The difference between the BAT and ARC is remarkable. Thanks- William
- ...
- 13 posts total
- 13 posts total