2. amps-preamps
  3. 1114390286

Tape input on preamp - Can I use for other sources

Hi,
A simple question......can I use the tape input on my preamp for other line level souce components (tuner, CD, etc). I don't have the preamp owners manual to refer to.

I thought I could but someone I talked to mentioned that the tape input was 'equalized' differently for a tape decks' performance (true/false)?

Many thanks for your reply!
naperaudio
fatparrot
1,314 posts
 
Swampwalker, so do you recall the exact function of this input? Or was it just labeling done to prevent confusion of the conventionally used "tape/source" or "source/monitor loop on" switch designation?
kr4's avatar
kr4
3,424 posts
 
The tape head input was used for direct feed from the tape head so that the deck did not need a built-in preamp stage. This meant that the gain/sensitivity of the tape head input was higher than MM phono input and that it had a specific EQ (NAB, etc) for that device. Rare today but the OP never told us what preamp he is referring to.

Kal
joeylawn36111
574 posts
 
Thanks for the correction, Fatparrot. Nice to learn something new...
swampwalker's avatar
Ag insider logo xs@2x
swampwalker
5,132 posts
 
kal is correct, again. If I can find the manual for the receiver, I will post the specs for that input.
naperaudio OP
17 posts
 
Hey Guys,
Many thanks for all the help! I just purchased a used Thor TA-1000 preamp (line level) and it has only 4 inputs (one of which is labeled 'tape').

I was truly hoping that I could use the 'tape' input for another source component.

This is the first time I've personally used the forum for a question of my own and you guys have been a terrific help.

Best regards,
Dave
More to discover