Vintage DD turntables. Are we living dangerously?

Fleib,

I do hope what ever is wrong with your UA-7045 is something that can be easily fixed. That is the tone arm I currently have mounted on my TT-81. You will be quite impressed with it if becomes fully operational.
In regards to the arm board on my Aries. It currently has the Graham arm board which I bought from Bob Graham to use with his 2.2 arm. I do have the original arm board that came with the Aries. It has been drilled for the Graham but I have not checked it to see if I could possible re-drill it to make it usable for the Lustre.
In all honesty, I have never had any problem with getting anything from VPI before. But they did sell a lot of these so I suspect they just sold all their back stock. I was quite surprised at their reply. It is after all nothing but a acrylic hockey puck!
Bob Graham has done the same thing with his arm wands for the 1.5, 2.0 and the 2.2. Due to certain production parts being unobtainable, you can not buy additional arm wands. He will do limited repair based upon parts available. This arm is not that old! I know our world has become a throw-away society, but come on!
Regards,

Fleib,
Just a thought I had......
How does the cartridge know the mass of the platter....❓👀
Regards

Hi Halco,

I was also blown away the first time I auditioned the Sirius III at the dealer over 10 years ago! However, I didn't notice any lack of mid-bass to lower-bass definition and power, maybe due to the different setup. Not sure about the air-supply in the Sirius III, but the stock air-supply for my Rockport 6000 arm is certainly inadequate, and major improvement can be had with a Jun Air compressor with integral surge tanks and multilevel of air regulations. With this upgrade, I don't feel the tangential arm is lacking in bass definition and power. If pressed, I may admit that the bass quantity maybe so very slightly less than arms like the FR64S, but the soundstage depth and width is something to die for.

But then, I must agree the performance of these flagship vintage DD turntables are shocking. It would be interesting if a direct comparison with the Sirius III could be arranged!

I have just managed to get hold of a Technics SP10MK3 from Japan, so will have some fun setting it up in coming weeks!

Cheers

You're a lucky man Thekong...
Did you actually own the Sirius III or did you just have the arm?
If only the arm...what table did you have it on?
Will be most interesting to hear your impressions once you have the SP10-III bedded in...😋

I wish I have a Sirius III, but no such luck yet! My Rockport 6000 arm is a simplified version of the Sirius III arm, and it is on a Capella II TT.

However, I am also in the process of setting up a Sirius II, so it would be interesting nevertheless to compare it to the SP10MK3 and Exclusive P3A in coming months :-)