Synergistic Red Fuse ...

teo_audio
Geoffkait: For audio, at least, it’s not about electrons. Electrons have absolutely nothing to do with it. It’s about photons. Hel-loo!

Teo_audio
What, exactly, is a Photon? As you know...’good luck with that’...

Geoffkait: Thanks for the excellent example of Newton’s Third Law: For every action there’s an equal and opposite reaction.

teo_audio
Speaking of photons and regarding electricity....Interestingly enough, the liquid metal mixture in the Teo Audio cables..just happens to be.... the most wide band high quality reflector known to humanity.

As in: 1) widest chunk of the electromagnetic chart/spectrum reflected... and... 2) highest percentage of reflectivity (as in ’best’ among first surface mirrors)

Besides truly functioning at the quantum level with kinetics and fluid, hydrodynamics and magnetics. More incomplete and unsolved math, theory, and engineering potential than you can swing a billy goat at.

........................

Whoa! What?! I’m rather relieved to hear something’s truly functioning at the quantum level. I do not like hear about incomplete and unsolved math, however. That’s a little too messy. So the liquid metal is reflecting photons? Interesting....pretty sure that’s the same way Pall Mall cigarettes worked, by traveling the smoke further and making it mild.

😄

Today I successfully installed a PCB fuse holder into my computer's power supply. The stock fuse had leads soldered to the ends that were then soldered directly to the PCB. It took careful work with the Dremel to widen the PCB inlets to accept the fuse holder and now I can roll fuses with ease. I'll soon order an SR Black fuse to replace the stock fuse rated at 6.3 amps/250V (5 x 20mm).

*This was cut from a post of mine under the Digital label titled "Computer PS Upgrade (Fuse/IEC/Teflon Cap)"

C_avila1, what do you think a different fuse will do for your computer?

Oh dear, no no no, lets not even go there  ptss.


Cheers George

I tried an SR Black fuse in place of a relatively new fuse ( about 30 hours on the stock fuse).

The SR Black sounded a little better. So to me it's not because the stock fuse was degraded over years of use.

Still, I think they are way overpriced, especially if they can be mass produced with the graphine, beeswax or nano particles. I have little desire to buy more of them.