2. speakers
  3. 128578-80822

Tekton Double Impacts

Anybody out there heard these??

I have dedicated audio room 14.5x20.5x9 ft.  Currently have Marantz Reference CD/Intergrated paired to Magnepan 1.7's with REL T-7 subs.  For the vast majority of music I love this system.  The only nit pick is that it is lacking/limited in covering say below 35 hz or so.  For the first time actually buzzed the panel with an organ sacd. Bummer.  Thought of upgrading subs to rythmicks but then I will need to high pass the 1.7's.  Really don't want to deal with that approach.

Enter the Double Impacts.  Many interesting things here.  Would certainly have a different set of strengths here.  Dynamics, claimed bottom octave coverage in one package, suspect a good match to current electronics.

I've read all the threads here so we do not need to rehash that.  Just wondering if others out there have FIRST HAND experience with these or other Tekton speakers

Thanks.
corelli
cohicks4's avatar
cohicks4
27 posts
 

I saw on here that several of you (corelli, and mac48025) had the Legacy Focus and went with the Tekton DIs. What was the difference in sound? I prefer rock, alternative and industrial, but have a fair collection of Jazz and Classical, but my heart is with the later. I have upgraded my components to many Agoner's advice and am currently running a Parasound Halo A-21 Amp with a Mac C48 pre, It's ironic these two speakers were compared when I was considering one or the other before I found this thread. The Legacys look like they have the rock aptitude with the larger double base drivers, I also like the  varied ribbon tweeters...can you guys help me solve this dilemma, so I can push the button on one of these?

Steve

mac48025's avatar
mac48025
613 posts
 
I finally had some time to hook up the Aric 300B and give it a lesson. Since I had to hold off on shipping it until I was back in town Aric had it pretty well burned in already. So how does it sound with the DI's? In one word.......sublime. As much as I like his Transcend KT 120, the 300B is just what I was looking for. It has all of the attributes of the KT120 with more texture, better tone and a more open soundstage with more pinpoint imaging. 

I am am experiencing a slight hum/buzz from the tweeters when music isn't playing but the background is pitch black when music is playing. There are two cathode bypass switches that allow me to engage/disengage cathode capacitors which effect gain and that hum so hopefully I'll find the right setting that will diminish the noise when music isn't playing. 

Thats a a minor issue as the music this amp provides is so engaging and delightful that I'm as happy as can be. As far as I'm concerned Aric has hit a home run with this amp!
evolvist
165 posts
 

ozzy2,875 posts11-14-2017 9:52pmBTW, some of my previous speakers were the Eggleston Andra 2 (215lbs each) and the Legacy Focus speakers.

As I am also a previous owner of EgglestonWorks Andra IIs I can compare them to the DIs, because I've often thought about the Andra IIs in comparison when I think of their sonic signature. They are very similar in sound, only the DIs are easier to setup, easier to drive, and easier to get a solid center image. All in all, the DIs are more of a pure transducer of sound without the niggling idiosyncrasies of a Von Schweikert design. Mid-bass (or lower-mids, if you prefer) have the edge with the DIs. The bass response is comparable between the two. One of the lovely things about the Andra IIs was that the bass sounded so natural, as opposed to many speaker designs these days where the bass sounds goosed.  

Anyway, that's my spin, for what it's worth.
mac48025's avatar
mac48025
613 posts
 
Ok, minor noise issue solved......total musical bliss with the Aric 300B amp. The B should stand for beast as this is one hefty and powerful amp. How can 8 watts produce such beautiful music with so much power? At the 9 am position on the MZ volume control its at 80-90 db. It can get MUCH louder. It amazes me.  
ozzy's avatar
ozzy
3,650 posts
 
Thank you so much for the posts and understanding.
I could get friends to help me move the heavy speakers but my friends are older than me! It would make a good You Tube video I guess though.

I am going to pass on these speakers for the following reasons.

1. I can’t believe that Eric or someone of knowledge from Tekton would not (at least) replied to me. That is truly sad.

2. Because of the lack of information as to the speakers specs.

3. With my own DIY speakers, I used the highest quality 8 ohm, highest sensitivity speakers with flat impedances that I was able to find. That and the crossovers I built used Mundorf SGO classic caps, resistors and inductors. All the internal speaker wiring that I used is the Cerious Technoligies Graphene Extreme.

But, I would have bought and kept the Tekton speakers IF they improved upon my setup. I mean the sound quality is all that matters to me.

ozzy
More to discover