Does It have to be loud?


Are you also under the impression that when people (or manufacturers) demo their equipment, they maintain sound pressure levels between 90-100 Dba. In general this is done in rooms being too small, and therefore the room will heavily interact with the sound heard in that room. Often, when you ask to lower the volume, the actual result is better, and –most likely- provides you with the information you were looking for. So, my question here is, do you also prefer to listen in the 90-100 dba range? Or do you –like myself- like to listen in the 70-90 dba sound pressure range? Of course, I’m referring to sound pressure levels at the listening position, which –in my case- is about 4 meter away from the speaker. 

128x128han_n
Uh, shadorne, trust me, high end speakers do not (rpt not) distort at moderate or higher than moderate levels. Where did you hear that fairy tale? 🧚🏻‍♀️ Even ordinary speakers, you know, ones that are not junk, don’t distort unless overdriven, which is not what I’m talking about. There is no physical reason why the system, any system, should become unlistenable at moderately high levels. Of course I completely understand that many people are accustomed to the distortion. It’s always been there.
@geoffkait

You do realize that I’m very much aware that you’re "following me" throughout the forum from thread-to-thread and post-to-post. Splendid! You could learn something.
I’m aware you’re stalking me, which is fine. As for learning from you, you’re right, I’m learning how the other side thinks.😬

”I didn’t know fuses could be upgraded.” 😛
I’m learning how the other side thinks

Trust me, I'll  partake in your nonsense on my terms. But the operative word you've used is "think". Kindly do so.
I trust you to continue stalking me. You could spice up your posts with a little humor. It wouldn’t kill you. 🤡