Merlin TSM comparisons

rebbie and paul, the tin plated wires will reduce skin effect by increasing the resistance on the out side of the strands forcing more of the signal through the middle of the strand. brilliant!
you always start with a 6 guage difference or more from jumper or hf wire. these hf wires should be no bigger than 15 gauge. so 9 is a good place to start.
stupid good for the money is what it is.
just went for a quick listen again.
b

Rebbi and Bobby,

Did you get Supra connectors? Spades? If so, I'm wondering which size. I see both a standard size and XL on the SJOFN website. Also: did you need solder them? I'm not very handy - at all - with a soldering iron.

Thanks!
John

Hello, John,
I bought the larger, spade connectors for the speaker, and the banana plugs for the amplifier end. The distributor will solder them for you, if you like, but I think it costs something like 30 bucks per connection (or maybe that's per pair, I don't remember) and Lars, who runs the distributor, said that they cannot really hear any positive advantage to soldering the connections. The small, spade connectors have a little tightening screw. The only tricky thing about using it, if our member correctly, is that it requires a metric hex wrench. The banana connectors are kind of interesting, as they allow you to have the cable coming in either flat to the banana plug itself, or at a 90° angle. You'd have to see it, it's hard to describe.

I spoke to somebody at Merlin, it wasn't Bobby, who said that while they love the Classic 6.0 cable, they had some doubts about the connectors causing some “smearing.” Bobby, is that correct?

i am using a copper tinned o ring connectors now. the spades i got from the dealer were were just a pressure fit (no solder) and gold plated. so i would think what we have now is better sounding but i will know more in a few days.
sorry.
best, b

Rebbi, I'm looking into my audio crystal ball, and I see Merlin VSM speakers in your home by June.