2. speakers
  3. 1287424096

component cones/spikes vs. rubber

I'm trying to decide whether I should put cones/spikes or Vibrapads/pods underneath my woodshelving which is directly underneath my components?

(Note: I currently have wood shelves underneath my components so the spikes/pads will be placed in a platform config. All of the above will be sitting on an audio rack)

Components:
1. Cary CD player
2. Audible Illusions 3A pre-amp
3. BAT 75SE tube amp

Appreciate any comments/thoughts?

Thanks,
broken
newbee
4,093 posts
 
Because tubes can be sensitive to vibration induced micro phonics I isolate all of my tubed components with absorbent supports. Some folks like this (subtle) micro phonic effect. Some don't. Your choice.
tvad
9,467 posts
 
You will receive divergent recommendations with no consensus.

I suggest you buy cones/spikes and Vibrapods (or a similar decoupling device...perhaps one of Herbie's products) that can be auditioned in your system with a 30 day home trial, and listen for yourself.

There are many devices that can be purchased with 30 day return policies (AudioPoints, Herbie's products, SR Research MiG footers among them).
mechans
2,999 posts
 
If you use heavy spikes into a massive board it will effectively dampen vibration which I find sounds best with my all tube amplification.
lwerner
58 posts
 
"DING" the winner is, Mechans, If you use Spikes, or better, pointed brass Footers, you will have a path for vibrations to leave the componant.
If you use soft rubber pucks, or similar, no vibrations will get into your componant, BUT the one`s you have will never get out, either.
stringreen's avatar
stringreen
5,112 posts
 
They all sound different....not better or worse. Also the materials that they are crafted from affects the overall performance. Brass sounds different than steel, etc. You have to hear it in place in your system to determine what is best for you.
More to discover