Best Active Crossovers?

Buy 4 Digmoda Ice power based amplifier with DSP signal processing, can be configured in a number of different variations. A DDC1000 for the woofers and a DDC552 for the mid woofers midrange and tweeter per speaker. The 552 is a 3 channel with 2ea 500W modules and a 250W module, the DDC1000 is a single 1000W module. Then - go to town with you laptop and play around with slopes / crossover points etc. the software is very easy to use and understand. A much better solution than any active crossover. Google them for more information

Best of luck

Peter

You have to be careful purchasing active crossovers for speakers. Some (not all) speakers need some sort of wave shaping circuitry to correct for issues inherent to the specific speakers. Martin Logans for example. So, when thinking about purchasing a third party's active crossover, contact the speaker manufacturer first and ask if wave shaping is required or if the third party active crossover will be okay for the speaker.

enjoy

Minorl , that be hard with the Dunlavy's - and with the Digmoda you can do all the "shaping" you'd want.

Marchand XM44 is good.

If you're using strictly digital sources, and you're open to something completely different....

You might think about a DEQX (or similar) digital domain x-over/preamp. These are 3 way units, so the mid and tweeter will still need to be jumpered. However, in addition to the overall theoretical advantages of crossing in the digital domain, these units also provide digital room correction (which I find compelling). This might be particularly useful to your application, because (as Minor1 noted) any missing notch filters or other FR correction built-into the passive x-overs in your speakers will be less problematic with DRC.

I understand that this is a different approach and not for everybody. Just thought it was worth bringing to your attention.

Marty