Teres Audio Verus Direct Couples Motor, Anyone?

We compared a Verus with our Reference II/gold motor and holographic mylar belt, on our 320. It went back to Chris. The Verus's measured speed was inaccurate and it colored the sound in ways that did not suit our music or our ears.

For other music in other systems the Verus might be a net positive but there's no guarantee. I've corresponded with people who've liked it and other people who've disliked it.

Try it yourself, but keep an open mind and critical ears.

I also returned mine to Chris. It was not compatible with my Teres 265. It transmitted low frequency rumble like mad. YMMV.

Ken Golden

I've got a Verus motor, but haven't had a chance to really play with it, other than set it up. It was a whip to set the O-ring so it would roll smoothly and didn't produce a "heart beat". With enough messin', it's now at a point where you don't hear it (with your ear pressed against the arm board). I'm using a solid acrylic platter. I'll post some thoughts after I get some hours on it.

I am surprised by your findings that the measured speed was inaccurate. In fact, I don't know how that can be since it has internal controls to set the speed using a strobe disc.
I was able to get it dead on without any variance at all. However, I haven't rechecked it since. I will today to make sure that it has remained the same.
As to the direct coupling coloring the sound, could be. But, I don't hear it. But then I have, thank God, never heard the subtle differences that many people hear changing the VTA. However, I am glad that you reported what you heard.

Hi Agaffer,

The speed controller only ensures speed stability of the motor. It does not guarantee speed accuracy of the platter, which will vary with the circumference of the platter (and the O-ring).

The controller steps are in .32% increments. At a concert A=440 Hz, a speed shift of .32% equates to about 1.4 Hz. A 1.4 Hz shift up or down might be inaudible to many. It was noticeable to me and much more than noticeable to Paul. YMMV, as always.

Exceptional pitch sensitivity is not necessarily a blessing. My mother and I have both walked out of restaurants because the piped in music was intolerable. Paul's worse. He hears it from the parking lot and refuses to walk in the door! ;-)

***
The Verus's O-ring and feet act as rubber parts always act when constrained and exposed to vibration, they store energy and release it back into the platter, delayed and phase-shifted. The audio term for this is "feedback". Whether it would bother someone is probably music-, system- and listener-dependent.

Many rock music listeners expect and enjoy feedback. To them, music without feedback does not sound or feel "real". Tube microphonics and the waveform diffractions of some horn speakers are forms of feedback too. People who listen to any of these might enjoy or not notice the Verus's additional feedback - since they hear similar effects every day.

OTOH, we listen almost entirely to acoustic instruments and non-amplified vocalists. One of our major system goals is timbral and temporal accuracy (which requires VTA/SRA adjustment for each LP, unfortunately). For us, feedback of any kind is identifiable, artificial and unwelcome. Most of our system improvements/upgrades have been aimed at reducing it.

Some call it musicality and presence. We call it a coloration. It depends on one's perspective on music and sound.