thanks Richard and Doug
I used a Feikert protractor
I'm tracking around 1.8.
the cartridge appears nearly level on the top, but very little clearance underneath, as the cantilever is riding high (tending upward). the arm is definitely low to the back by a good 1/4 inch (when the vta sweet spot is hit).
that's why I couldn't find the vta spot before
I'm a bit concerned about the low clearance of the cartridge over the record. It appeared to be higher before
I'm considering sending my triplaner in for the micro vta adjustment but I am using the added rings triplaner tip
I used a Feikert protractor
I'm tracking around 1.8.
the cartridge appears nearly level on the top, but very little clearance underneath, as the cantilever is riding high (tending upward). the arm is definitely low to the back by a good 1/4 inch (when the vta sweet spot is hit).
that's why I couldn't find the vta spot before
I'm a bit concerned about the low clearance of the cartridge over the record. It appeared to be higher before
I'm considering sending my triplaner in for the micro vta adjustment but I am using the added rings triplaner tip