Short of buying a 400 dollar digital level, what have you found that really does the trick. I've tried various cheap bubble levels with fair to poor results.
buy some level of just a vial that has clear precision specs from manufacturer, usually from Japan, Europe, USA, Canada Level the turntable, not the plinth. Ideally the tonearm headshell and turntable should be level.
Piedpiper's right. 1. Level the TT stand 2. Level the platter top surface 3. Adjust the tonearm mounting so that its bearings are level. This is easier on some arms than others of course.
Levelling the headshell is a good place to start, but whether it should remain level varies with the cartridge. Nearly all cartridges benefit from fine tuning of both azimuth and VTA, which could result in a non-level headshell, depending on the rig.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.
