Ortofon Per Windfeld Load Impedance?


I'm curious to hear what load impedance other PW owners are using for this cartridge. My manual recommends > 10 kOhms which I suspect is a print error. I notice that the dealer sites are recommending >10 Ohms.
taylor514
Another obtuse response Z and devoid of contributory value.

You've not addressed any of the issues.

Again.

Raul knows the material well in discussion here. As I do. As Ralph does. If that's "2 (or 3) peas in a pod" I consider it a compliment.

How's that white paper coming along?
Jloveys,

I did not get a chance to hear the Tron 7 in my own system, but in my friend's system, I got to hear it with two different sets of 12AX7s. I did not find the Mullards too lean, as you found them, but, they were extremely phasey sounding, particularly so with reproducing the piano. It was so phasey sounding that it almost sounded like the phasing of the two channels was off (except the center information was reasonably coherent).

I much preferred the Amperex Bugle Boys that were substituted for the Mullards. My friend thought that Telefunken 12AX7/EEC83 was a bit too lean in his setup. I did not get to hear that tube, nor some of the substitutions he tried with the other tubes in the unit.

With the Amperex, I thought that this was a very good phono stage -- musical, reasonably dynamic, and dead quiet (my friend's speakers are 105 db/w efficient so noise is easy to hear).
Very interesting finds, guys ! What are those speakers your friends own? Not so easy to have Amperex Bugles here but worth the searth. Thanks.