M2Tech HiFace - using it? Like it?

In reading the thread, there seems to be an audible improvement in using the BNC rather than the RCA termination. Also an improvement in going with an external power supply.

Not sure if anyone tried it, but would there be a difference in where the device is located. Standard is to put it on the computer and then use a longer length of coax cable to the DAC. You could also locate it at the DAC and use a longer length of USB cable back to the computer. I was thinking that to locate the cable before the reclocking might be better.

Has anyone tried it?

Paul

Pkubica

Gee you're a trouble maker!

it's really gonna piss me off if plugging the Hiface into the DAC and using a longer USB cable sounds better!

My thinking on that was my Oyiade digital cable is shielded and/or constructed better than any USB cable I've seen... so I plug my M2Tech right into the tower and use a 1.3M BNC cable.

the other note was a BNC wire handles transmission of digital info better than does USB.

With a SPDIF RCA connection, perhaps there is something to going with a longer USB wiree.

I've heard/seen online it will work either way.

I suppose too one changes the sound perhaps too by eliminating the SPDIF/BNC cable.

Try it out and let us know... I'd as soon not find out I spent a couple hundred bucks more than I needed to.

Just got the modified HiFace back from John Kenny - he has proven beyond a doubt the notion that cleaner power provides cleaner sound. Using a couple of books to prop it up, I plugged the Hiface (Kenny's box style) directly into the computer and then out to a 35' run of digital SPDIF to the processor. The sound is markedly improved, I am excited about my system all over again. BTW, propping up the HiFace on books is really not a permanent solution - I'm trying to purchase a 1 ft. 2.0 USB extender but living in Mexico that is more difficult than you would think.

FWIW, I prefer the idea of a very short USB and a long SPDIF digital cable. I have more confidence in the SPDIF. I regret not being set up for BNC.

One other bit of advice - If you order John Kenny's recommended battery charger (3.0A version) from Batteryspace.com be sure you also order the Wadia Plug to 2.1 MM barrel plug adapter. Otherwise you get just the Wadia and alligator clips, neither of which can be used on the box style modified Hiface. I speak from experience. The adapter can be found when you click on the charger - just scroll down a little further.

I use both the BNC boxed jkeny-modded HiFace and the RCA jkeny-modded HiFace. Previously I used the unmodded HiFace, BNC and RCA. Never looked back, the difference is that great. I have not heard better from any digital source. and I've heard a few. dBpoweramp, FLAC, foobar, Oyaide coax and Bryston or Benchmark DAC comprise the remainder of my digital chain.