how can a line cord affect frequency response ?

the entertainment i get from reading and answering posts is more gratifying than listening to the "best" stereo system that anyone could assemble.
Mrtennis (Threads | Answers)

MrT, you are an admitted lo-fi aficionado, and your posts on the topic of equipment and listening preferences appear to be attempts to validate your choices. There’s no need for affirmation, MrT. Your choices are fine.

The post referenced above is sad, and telling of your motivation to generate new threads, which appear to be forms of personal therapy comprised of a self prescribed treatment that entails poking a stick into as many hornet’s nests as possible without getting stung. No stings = a good day.

Good Day, MrT.

Twl...Have you ever determined the noise level and output impedance of your battery? It ain't zero! However, if the 12vdc feeds a capacitor, as with a normal power supply, you won't have a problem.

In accordance with Shadorne's observations about coal-fired power plants, have you noticed any difference in your sound depending on whether the solar panels were exposed to bright sunlight or only a dingy overcast?

to post, i must, for my cause is just
and this is my motto, "in words do i trust"

some say i stir things up, like an unruly pup,
puckish, picaresque, iconoclastic and a bit rebellious too ?

nobody is perfect, we all have faults
i give it and take it, so keep your cool and heed this rule:

life is too short to growl and snort over a mere bagatelle of audio opinion

tvad, i hpe i have saved you a trip to your therapist, you certainly have let off steam.

i hope you feel better.

Regarding the question how it is possible that a power cord can affect frequency respose: can it be measured that one power cord gives a slightly different frequency response than the other? Even small differences (+/- 0.5 dB) could be heard. If the differences are less than 0.5 dB then you can say that there are no measurable differences between power cords and that that sonic differences between power cords (if there are any) should not be heard.

Chris

Eldartford,
My stuff is made for battery power, and there are capacitors in the power supply, and I do keep my wires short to try to minimize the inductance issue too.

To answer your question, I have not noticed any change or difference if the sunlight on the solar panels changes. However, I mostly do my listening in the evening when there is no sunlight, so I don't know for certain if there might be any audible changes resulting from the varying voltage coming from the solar panels into the batteries.

In the case of my turntable, the way the battery power supply works is by actuating a relay that disconnects the charging ciruit when the TT is running. This is because the TT battery option is designed for normal homes using AC power. But I can also use it in my application.

Just to get another opinion here, what do you think might be the effects of different component's power supplies modulating the power lines(and therefore the other component's power supplies), and possibly causing some noticeable effect, especially high-power amplifiers that suck alot of juice? I admit that I am only going on a hypothetical idea with that. But I thought it couldn't hurt to keep all the power supplies independent of each other. Do you think this may be something that could use a closer look in our home audio systems?