Home made cable lifters.


I was wondering if any of the a`gon members have come up with an inexpensive and effective way to get these things off the deck.
capt369
Yes, Insulators! I use the old green and purple glass ones that I bought at flea market for pennies.
For the absolute best cable/floor isolation, take fishing line and suspend them from the ceiling. Space the lines a couple of feet apart and keep the cable a few inches above the floor. You might start with a good clear monofilament or fluorocarbon line at 10lb test.

Then try different line strengths and colors, and heights off the floor to get the best sound. Clear tends to sound the most transparent, and saturated colors sound darker. The stronger the line, the more damped the cable will become, and that may sound heavy. Of course your results will depend on the cable, the floor surface and the type of music you like.

When dialed in, this approach is guaranteed to have the best performance for almost no cost, and provides much experimenting fun between listening sessions. For others who may have tried this already, please give the Capt some helpful advice.

PS, Be very careful, as these lines can be hard to see, and someone might get tangled and cause injury to themselves or damage to your equipment.

PSS, I am not associated with any manufacturer of fishing products.
I have an entire collection of the porcelain insulators. Put it together on ebay for the same kinds of prices Thorman mentioned. I like the glass ones even better. BUT shipping is expensive and a lot of them seem to break even with decent packing. Only problem is that they are a bit lower then I would like.
If you live in New England,theres a shop in Erving,Mass.,that has hundreds of these insulators and are very cheap..I pick up a couple every time I am in the area.. If you need directions I can help.....
Great suggestions all. Thorman, I live in the Akron area and I`ll check local shops for old insulators. If I come up empty, there are other suggestions I`ll try. Thanks everybody!