F I M Speaker Cables


How good are these cables more interested on the gold series Thanks
accel
Accel- I'm living with two pair of FIM Gold speaker cables for bi-wiring. As Sdrconsultant has stated, the speaker cables are VERY stiff and could easily lift light weight components! Of course, that's why you must pre-form the cables to eliminate this from happening. As for setup, the cables do require time to relax after the initial manipulation. I can't stress this enough, the next day or two, double check the binding post connections. The posts can become loose as the tension from the cables diminish. They then take a couple of weeks to fully "burn-in". The sound, is difficult to describe. In most respects, I find it nearly revolutionary. Detail is presented in such a relaxed manner, that initial listening could lead one to believe that they are rather polite in the midrange. However, after living with them, I believe that the reduction in noise and other "artifacts" allows greater involvement and immediacy than any other cable that I've auditioned. Dynamics, both micro and macro, are world class. Timbre and harmonic structure are the best I've ever heard in my system. Needless to say, I disagree with Sdr's conclusion about the FIM Gold speaker cable. To each his own. If your system is pushing or aspires to state of the art, then I highly recommend the FIM Gold series cables. Just my .02
I have a pair of Gold series speaker cables, and have found the workmanship to be of the highest quality. In fact, some of the best termination work that I've seen. That said, I agree wholeheartedly with Jcbtubes findings. I haven't tried the speaker cables with mini-monitors yet, however I'd doubt that many who would be purchasing a pair of cables in this price range to use mini-monitors. Might be an exception or two. I like the idea that something that is good as the FIM Gold sells for so much less than the cables I'd used in the past. (It does make it harder to sell your used easily though). Just my 2 cents.
i agree wholeheartedly with jacks and jcbtubes. the fim's are world-class and the current wire of choice for avalon acoustics. (these folks can have anything they want, BTW, including the most obnoxiously-priced nbs.) me thinks sdrconsultant is a pimp for fatwyre? i hope winston never sells his wire thru those leeches.
Hi Accel, I have been using the FIM speaker cable and as Sdr said, it is STIFF. I pity the poor guy who has to bi wire. As Jcbtubes said, watch those connections. I disagree with Sdr on the construction of this cable. The FIM has weight, power, and is very rich sounding. There is an ease to the sound that I had to get used to. I have never heard a cable that has a density in the images as the FIM. This density in the images creates a dimensionality that is truly extraordinary. This is the first cable that lets me see (hear) the back of the soundstage as well as the front. I still feel that I have a lot to learn about this cable as it is so different from all other cables that I have tried. I wish I was better with words in describing what I hear. If you are looking for world class sound and have a high res system, then audition the FIM against any other cable. IMO this stuff is amazing. Do not think you can just pop this stuff in and out and get a true understanding of what this cable can do. I might be much slower than many others in doing comparisons but do not think you can come to a conclusion with a 1 day trial. I have had this cable for a time and I am still learning things about this cable.
Accel and Cornfedboy, clarification follows. First I am no pimp for fatwyre. Our company is a high-end custom designer of 2 channel and theater system for commercial and residential clients in Minnesota. Neither I nor our company has any connection with fatwyre. Second we have three complete installations with FIM gold at clients insistence. Two pair of tweeters blown out of JMLab Utopias, one Theta Gen Va DAC gone up in smoke, I could still notice the scent of burnt electrical components when I arrived, one dCS Delius and Purcell damaged. All of this destruction is a direct result of the FIM cables, more specifically the power cords. No one in the thread is questioning the beyond difficult to work with cables. Because of their stiffness they do loosen binding posts off speakers and amps and the power cords do NOT stay in components resulting in the above losses. I agree with all the posts saying they are amazing sounding cables. In our collective opinion not better but different than the other high end cables. The conclusion to all this is we will no longer install this brand of cable. It is not worth the risk. Clients are not always as attentitive as they should be. No matter how often we go back to the site and no matter what unique rigging we have tried it just isn't woth the risk of losing clients and damaging our reputation (looking foolish in the clients eyes with smoking equipment)for a different not better sound. Other posts may be right that these cables will become the world standard in listening but, from our point of view we can not be at every client's listening room for every session so this results in an unworkable product for us. IOHO we respectfully recommend against them. Thanks for all your patience reading through a long post.