B&W 804s + Atma-Sphere M60 MkIII.2

Swampwalker,

Right now I'm running stereo subs, but's only because I have not come around to building the Y connectors to have them both sum-up L&R signals. This is the recommended approach per Earl Geddes, which I'm following with good results.

I really don't want to come across as a specialist, as I'm learning along the way. But if stereo subs sound this good and it's a "deficiency" per Geddes' recipe...I think it should sound even better with dual mono.

Some people on these forums believe we can perceive directionality below 80 Hz. I tend to believe in people like Floyd Toole (author of Sound Reproduction) who say otherwise and I can see they really know their stuff. So if we can't perceive directionality, Geddes approach makes full sense to me as it addresses the interaction with the room, which clearly is the biggest deal under 150 Hz.

Hope this helps!

Michel,

Indeed, I have always heard very good things about customer service from Atmasphere. That is great. Seems is up to you which amp to go with. BTW, I've been very well behaved in not steering you towards the MC275 as I'm quite intrigued about the differences between your Tannoys and your 804S with the 275. Should you go with the 275, please let us know and I'll be bugging you down the road.

One caveat to Frank's suggestion with the Zero: the 275 has an output transformer that apparently does a similar thing to the Zero, and has 16, 8 and 4 ohm taps. In fact, an audio buddy drives his CLS planars with his 275 with no issues whatsoever.

About REL vs Rythmik. Such a difficult question to answer well. The REL is great, but I had only one so the comparison is not fair. It also has a 10" driver vs two 12" drivers in a much larger sealed enclosure each one. For the price of one REL I got two Rythmik kits and built the enclosures pretty stiff and at the ideal size. Bass is much better with the Rythmiks, but maybe with two RELs I would have gotten the same response. Yet the RELs don't have as much setup flexibility as the Rythmiks. Rythmiks are also servo-controlled, and indeed the bass sounds very controlled.

As of now I'm partial to the Rythmiks + spending a fair amount of time setting them up.

Michel,

I don't use a Zero with the S30 and the 16 ohm Zu's as the Zu's impedance appears ideal for the S30. However there is a body of thought that it might sound better still thru a Zero at 2x looking at an impedance of 32 ohms. I'm happy with my situation as it is.

The Zero is really intended for your kind of situation where you enjoy your existing speakers but the 3 ohm impedance is not ideal for the amps you would like to pair it with. With the Zero you are adding wire and a passive device between the amp and speaker but in situations where it's needed the positives appear to far outweigh the negative.

Regarding changing your speaker, thats a whole other ball game. If you enjoy the B&W's keep them and find an amp that does what your looking for with them.

Lew,

Wasn't trying to steer anybody anywhere. Just trying to answer a technical question of the OP regarding using an OTL with a speaker with a significant impedance dip.
As an aside, it's great that you and your buddy are getting great results with the MC275 driving speakers with low impedance dips. It's a testimony to the excellence of the output transformer and power supply. Even though the output transformer has multiple taps the amp is still "seeing" the impedance dip of the speaker. The question is, would it sound better still with the Zero in place?

Good luck making your choices.

Lewinskih01, I’ve never had this impression that you were steering me toward MC275. It is a wonderful amp and no wonder it has been around for more than a half century! Contrary to that, I appreciate your sharing experience and as always I would like to learn more on audio setting stuff, it is kind of endless passion to improve sound quality and enjoy more from the music. By next week, I plan to ask MC dealer if I could have a MC275 for a week or so for a test drive!
The comparison was not really between Tannoy Canterbury vs. 804D. They are on different leagues and price ranges. I meant regarding price tag of T. Canterbury, I was anticipating to get more sonic features, like placement/precision and better distinguishing of instruments in orchestra, more depth behind speakers, more imaging on two sides of speakers rather than in front. I bought it as used locally and placed them per se professionally with some help. Of course tastes are different when it comes to listing preferences.

Francks, As for Zero T. on amps, there is this Graff Gm100 amp which functions as hybrid OTL! It seems they use kind of zero T. for accommodating low impedance speakers. A friend of mine (back in EU) has this one and she is very happy with it. I am not sure if Graff audio is in business any more.

As my wife complains, changing audio gears and never totally been satisfied with our choices is more than a passion, it is an addiction! I would add, it is a positive addiction…

Cheers,
Michel.

Thx, Lewinskih01. I am interested because my Ref 3A Supremas have passive subs and I have always wondered if I should drive the sub cabinets with a stereo or mono signal, downstream from an active crossover/bass management device.