OTL or SET? Differences?


With my limited knowledge, I know that OTL is transformerless and SET is single-ended. But what are the main advantages and disadvantages of these two designs? How to choose matching speakers for these two different designs?

Currently I have an Atma-Sphere OTL amplifier.

Thanks in advance!

Otto
yu11375
You are one lucky and/or smart fella. Not many of us are blessed with OTLs. (Lifetimes ago, I had a pair of NYAL 'Futtermans'.)

OTLs, I think, are noted for their cleanliness and neutrality. SETs are noted for their musicality. I know this is a vague description, but for some reason SETs seem to retain more of music's harmonies; what they produce simply sounds more like music. SETs generally are lower powered, having by definition only one output tube, and hence are well suited to driving high-efficiency speaker systems. OTLs, because of their relatively high** output impedance, are not well suited for driving speaker systems that are lower than around 8 Ohms impedance or that demand high currents. High-ouput SETs have to use relatively large and exotic output tubes that often use VERY* high rail Voltages. Even my relatively common 50-Watt ASL Explorer 805s use over 900-Volt rails.

I wish I could find an affordable 150-Watt SET*** to use with my Eminent Technology 8s; meanwhile I continue to love the sound of ASL Hurricanes in triode driving the MR and tweeter panels of those 8s. Maybe I need a pair of all-triode 140-Watt Atma-Sphere MA-1 MkIIIs with their 5-octal frontends and FOURTEEN-6AS7-triode output stages.

* as is lethally high.
** sand-amp lovers probably would call that 'astronomically high'.
*** If, and I do mean 'if', an SET is the ultimate amplifier of music, and if that glorious rightness is due to several factors including 1. the use of indirectly heated tubes, 2. the use of only triodes, 3. the use of no paralleled tubes, and 4. certainly no push-pull operation, then my ASL 'canes, even running in triode, commit sin numbers 1, 3, and 4. The Atma-Spheres, too, commit those same 3 sins but have the benefit of not requiring output transformers. Hmm...
.
I own and sell both OTLs and SETs, and would say that they have many of the same qualities. At the risk of overgeneralizing, I'd say that OTLs tend to be a bit more lively and dynamic and SETs tend to be a bit sweeter and warmer (I can comment some on why if you'd like). I've heard superb presentations from systems with both types of amplifiers.

Since it sounds like you have a single Atma-Sphere amp, I presume it's an S-30. As long as you don't ask it to drive a speaker whose minimim impedance dips below 7 ohms you should be fine. An SET would be much more forgiving of lower speaker impedance, as would the larger Atma-Sphere amps. On the other hand if you pair the S-30 with a 12 or 16 ohm speaker, it sounds even better and will put out more power (roughly 45 watts into a 16 ohm load).

The S-30 is definitely a specialty amplifier when it comes to loudspeaker matching. Are you looking for speakers, and if so what are your requirements and ballpark budget?

Duke
Duke, you are right. What I have is Atma-sphere M-30 and it is part of my second system which is for chamber music listening. The project is for my main system as I am experiencing slightly hearing loss on my left ear. That is the reason for me to change my Thiel 3.6 to speakers with high efficiency. I DO love the bass Thiel 3.6 brought me for the past 5 years. Yet I put lots of effort to tame its metal tweeter with little success. I also owned Silverline Sonata I around 4 years ago but the bass from Sonanta I just not enough for me while I listen to Mahler's 2nd symphony or some organ music. Please provide your suggestion.

Thanks!

Otto
Try sopme other speakers.Thiels are way to brite and I like a brite sound.Not sure if you are commited to them that one model is more and offender than another but have thought read the best speaker they made was the CS6.I say difernt because I knwo that my freind had CS 7's (huge with cement bafles-what a bitch egtinbg those to a secopnd floor!!)If going SET I see there are some used Von Schweikert DB99 derived fromsome aburdly priced $60K speaker used for $10K (ouch!).But they got very good reviews have bass covered by 300 wat bass amp but deliver 99DB from only one watt!!!But the price and size maybe more suited for main system not a smaller chamber one.
Me I've thought of inexpensive Omega's for bedroom system with maybe a Fi using low power 2A3 while my main rig will be high powered SS or higher powered tubes (wish I never sold that Mesa Baron.While not SET you could swith it's 12 tubes in banks of four from pentode to triode "on the fly" suiting the amp to different music geting 60/90/120 in full pentode you selected.
I bought a pair of German Odeon Tosca's which is a semi horn and dealer sold Atmasphere and said he had many happy customers match them up (horns like wonderfull Avantegardes and others tend to be very efficinet and might be worth hearing but again size/expense of many may not suit and subs can be difficult.Only REL and other subs which are VERY fast usually using multiple small drivers can even try to blend with horns,electrostsic or planar speakers like Maggie.Everything sub wise is mainly to sluggish.
Not fammilar with sound of OTL but from above even though I like dynamics and speed sounds like I'd prefer the SET sound.Nothing beats lot's of EL34 power for a great midrange in medium efficncy and B300,2A3,845 etc in high effciency speakers.
Chazzbo