Jeff Rowland 501s and PC1s


I installed the PC1s with my 2 Yr. old 501s and am very happy with the improvement. Sound stage is wider, taller and deeper. Image is more pronounced with increased detail.

As for value, $3200 for the PC1s on top of $6700 for the 501s is alot of money. A lot of very good amps at this price piont.

For me, Rowland equipment has a very natural, uncolored sound that I have found compatable with all my other equipment over many years.

System:
Esoteric X0-1 Limited
JRDG Concerto Pre
JRDG 501s
JRDG PC-1s
B&W 802Ds
Cardas Golden Reference, all cords, cables and ICs
ASC Tube Traps
Room Dem. 13'x 15' x 9'Hi
phous
I use 2 PC1, they are on the way to the 300 hours or almost above? I don't know
Clavil, how did you use the PC1s without the JRDG original wires to connect them with the 501s? You seem to have received the PC1 to amp wires just a couple of days ago. G.
Guido,

My dealer gave me both PC 1 for home demo with modified NBS Monitor II power cables, I only got the original JRDG cables yesterday ... he was right!
Hi Clavil, just trying to understand. . . you were using NBS power cables instead of JRDG 'pigtails' between PC1s and 501s, and you experienced that the modified NBS power cords yielded a more desirable sound for the 501s. If my description is correct, I expected your results. . . the JRDG 'pigtails' are just stock wires, and as such they are unlikely to be at the level of any high end aftermarket power cords. Guido
Hi Guido,

I got the 501s with the Capri together (power cables AET EVO Hin from the first day),
than I had one PC1 on the Capri (power cable between these two NBS Monitor II from the first day),
later I got a second PC1 and I put them on the 501 with two Monitor II,
I had never seen the JRDG original powercables for the PC1 until I wrote here, I asked for them to hear the difference with the Monitor II ... that said the european JRDG cable is not a Pigtail ...

I hope now it's a more clear ... sorry for my english