KT88 or EL34 based tube amp for Titus ES


I’m shopping for a new integrated tube amp for my Triangle ES speakers. Music source at the moment would be Logitech squeezebox internet music streamer. Room size is 12X12. Primary listening habits: Jazz, classical, vocals at low volume at most of the time. I have a few ideas:

1. PL Prologue Two
2. Mystere ia11 (or do I need step up to ia21 to get the best out of my speakers)
3. PL Prologue Three/Five combo

I never get a chance to compare KT88 ( power) with EL34 (tone) side by side, some people like EL34’s the mids and the soundstage. I understand that KT88 might go lower,…but does it really matters with small bookshelves like mine? Any suggestions? Thanks.
128x128srmax
Linearity and clarity for the most part. These are the SED6L6GC which have a good rep and are very rugged. (Caveat, there are lots of 6L6 types so if you are investigating them, be mindful of the differences, especially in the Baron. FWIW my Baron is biased for the old Sovtek 5881's so I have not heard them in it, but I have heard the 5881's and the 6L6's in my Primaluna and there is no comparison. The 6L6's are much, much, better.) They are neutral and very natural in this amp.

Hope that helps you a bit.
Tpsonic good point with an IC, I would like to keep it simple, thanks. I use to have Dialogue Two with my Focal 918, what a match!!! I just loved the air and space. I had to give it up, hoping that my HT receiver will do the trick. Unfortunately, no sir, i didn't like it at all. My tube amp was gone. So, here we go again, I loved the sound of Dialogue Two, on the other hand I didn't care for the RC. Volume control at low levels wasn't precise enough. Stock KT88 are good enough for my taste, but I’d love to try EL34 as well (or have that option). I will pass on the RC, just regular good pot or step attenuator will do. PL 3/5 might be closer to Dialogue Two, right? Is there such a thing like too much power for your speakers? Or you just are gaining better control on the bass driver? Thanks.
If I could toss a seemingly odd suggestion, but it might be worth checking out the 18wpc Almarro A318B Single-Ended/Class A integrated that uses 6c33c output tubes. It is a phenomenal amp with power, tonal purity, and silken highs. It seriously equalled my much more expensive high-end amps in musical satisfaction.

It was able to drive 90dB/4ohm Jean Marie Reynaud Twins mkII monitors beautifully. There are a few, simple, aftermarket upgrades(coupling caps) by response Audio that take the amp to a whole 'nother league - 2 V-cap coupling caps; 2 Black Gate cathode bypass caps; 2 Elna Cerafine cathode bypass caps; a Sonicap power supply bypass and a Noble volume control pot.

Also check out the JAS Audio Bravo 2.3 Integrated Amplifier , like the reviewer in the link, I also owned the reference level $8k Art Audio PX-25 and found the Almarro to be nearly equal in many ways.
Thanks for your suggestion. It proofs that there is a life beyond the Primaluna world. Almarro looks very approachable. Is there a danger of damaging speakers with single-ended amp, say when the burned filament shorts out the output? Thanks.
I too have looked at the Almarro.Be sure to find a reliable source for your 6c33c tubes.I know that Quicksilver gave up on them.Lamm keeps some,hand selected for the output on the ML2.