Power cord for CJ MF2500A

Modern cj amplifiers, including the great premier 350, have 20Amp IEC brackets factory installed. The cables they supply are industry very good quality cables, not too expensive - may be they will be able to supply you a custom length cable.

Perhaps a single short custom made extension cord? or, send your amp to CJ to get the cord lengthened? or have a tech install an IEC into the chassis? (Furutech makes a nice gold one for $20 FI-10)
The simplist would be to just make a cord yourself with the added length you need. Use plugs from a hardware store, and have a single female A/C on the end. Then it will look a lot better than an ugly powerstrip sitting there. Use a big cord like ten gauge 3 wire cord in your short custom extensioncord. I made one like that a few years ago. and just keep it around. Mine is like two feet long.

I used a 2500A for years. I found this Naim recommended, Wiremold L10320 brand power strip extension, which has very high quality parts but no fuses or overload protection, to be the perfect solution. I bought mine from Allied Electronics, but they are generally available, and can be purchased from any Naim dealer.

I have a 350 and have used several, both 20 amp and 15 with a Voodoo adapter. They do sound better than the stock cord. I would get a good 15 amp IEC installed. It would be easier to replace the stock cord with a better captive one but you wouldn't be able to try others.

Thanks for the responses. I'm leaning towards having a good 15 amp IEC installed. I could then use my DCCA power cord.