Power cord for CJ MF2500A

Perhaps a single short custom made extension cord? or, send your amp to CJ to get the cord lengthened? or have a tech install an IEC into the chassis? (Furutech makes a nice gold one for $20 FI-10)
The simplist would be to just make a cord yourself with the added length you need. Use plugs from a hardware store, and have a single female A/C on the end. Then it will look a lot better than an ugly powerstrip sitting there. Use a big cord like ten gauge 3 wire cord in your short custom extensioncord. I made one like that a few years ago. and just keep it around. Mine is like two feet long.

I used a 2500A for years. I found this Naim recommended, Wiremold L10320 brand power strip extension, which has very high quality parts but no fuses or overload protection, to be the perfect solution. I bought mine from Allied Electronics, but they are generally available, and can be purchased from any Naim dealer.

I have a 350 and have used several, both 20 amp and 15 with a Voodoo adapter. They do sound better than the stock cord. I would get a good 15 amp IEC installed. It would be easier to replace the stock cord with a better captive one but you wouldn't be able to try others.

Thanks for the responses. I'm leaning towards having a good 15 amp IEC installed. I could then use my DCCA power cord.

Any idea on how much it would cost to install an IEC? I called one tech shop and they wouldn't give me an estimate without looking at the amp. I'm looking for a ballpark figure.