why balanced power last before component?

Atma, as a follow up, in Baggini's book there is a section titled
MONITORING POWER QUALITY. In it Andreas Sumper & Samuel Galceran-Arellano open by stating "power quality phenomenon are physical phenomenon that, in many cases, are APPEARING AND DISAPPEARING ARBITRARILY (not based on reason or evidence)." This arbitrariness is something that definitely bothers lesser designers than yourself; so it looks like there is a profitable business opportunity; perhaps a global one. Best regards, Peter.

I have found that designers in this industry often do not like being told that they have introduced a bug in their product.

The way you ground audio equipment BTW is simple: the circuit ground in the gear is kept isolated and insulated from the chassis. This includes the input and output connections. The chassis is directly grounded to ground through the AC cord. The audio ground is then referenced to the chassis through a resistance, one that is large enough to prevent any significant ground currents. In this way the equipment will not put any current though the ground and will be immune to ground loops.

Its simple- not rocket science, but you would be amazed at how many designers have not sorted this out. As a result there is a lot of snake oil out there dealing with the aftermath of poor grounding, and its not limited to high end audio.

I use an isolation transformer (medical grade) from the wall before my Shunyata Triton. It greatly improves the sound of the Triton vs. taking the Triton directly from the wall.
09-20-14: Sabai

Medical grade? I assume the secondary of transformer is floating above ground, is that correct? In other words the two output leads of the secondary are Hot ungrounded leads. Neither lead has a reference to ground. One lead was not intentionally connected to ground making it the neutral conductor thus making the new separately derived power system a "Grounded AC Power System".

NEC calls this type of power system an "Isolated Power System".

If your medical grade isolation power transformer is indeed operating as an “Isolated Power System” You will not read a true 120V reading from either contact of the receptacle to ground. Danger Will Robinson!

Here is what Bill Whitlock has to say about a balanced power system.

Page 201
Quote:
Bill Whitlock, 9/4/2012 Overview of Audio System Grounding & Interfacing 201

So-Called “Balanced Power”

• Properly called SYMMETRICAL power
• Has very seductive intuitive appeal
• NOT similar to balanced audio lines in any way!
• Uses transformer having 120 V center-tapped secondary
• Both line and neutral output blades are energized at 60 V
• Although advertising often implies endorsement, NEC seriously restricts
its use – because it’s potentially dangerous!
• ONLY FOR PROFESSIONAL USE
• NOT to be used with lighting equipment, especially screw-base bulbs
• MUST have GFCI at outputs
• Only technical function is to reduce leakage currents
• Leakage currents are trivial system noise sources
• Reported noise reduction generally less than 10 dB
• Any real benefit likely due to its clustered outlets
This is an example of “marketing gone wild” if ever there was one!
End Quote
http://centralindianaaes.files.wordpress.com/2012/09/indy-aes-2012-seminar-w-notes-v1-0.pdf
.

^^ thanks for that, I did not find that in my search. Someone asked about balanced power on the OTL Asylum over on audioasylum.com, to which I responded:

One thing about balanced power- equipment is not designed for it. Here is an example:

If you are to meet UL or EU directives (CE mark), the fuse has to be able to blow to protect the user. The tricky area is what if the power switch, which is mounted to the chassis, gets shorted to the chassis and allows it to become 'hot'? The fuse will blow, because it is in series with the chassis. Now the same thing is true of balanced power.

But what if something happens such that the other side of the line shorts to the chassis? What then? There is no fuse for that. As best I can make out, in this situation there will be 60VRMS on the chassis- IOW it will be 'live', as in a balanced situation there is no 'hot' and 'cold'; both side are 'hot'.

As long as everything is working, balanced power offers lower noise if you have bugs in your equipment's grounding scheme. This is because if there is a grounding bug, there will be current in the ground connection. This can cause ground loops and in a really bad situation even damage something. Balanced power offers a solution for this. But ideally, there will be no appreciable current in the ground, because in a properly grounded audio system, the circuit ground floats at chassis potential, but they are not the same circuit- IOW its bad design practice to use the chassis for a ground!

A lot of audio manufacturers have not sorted this out, and it does not matter what field (pro audio, broadcast, high end audio) they are operating in. For this reason you will see some pretty respected names extolling the virtues of balanced power.

The part about there not being a second fuse is pretty important. In nearly all equipment made, there is an assumption that the 'neutral' side of the line as at ground. So if it is shorted to the chassis not much can happen- thus no fuse for that side of the line.

Balanced or more correctly, symmetrical power, is not anticipated by any equipment manufacturer or designer I know of. What this means is that if the chassis is shorted to the other side of the line from the fuse, 60 volts RMS (84 volts peak) will be exposed to the operator. If this occurs in the wrong environment and conditions, it could mean instant death.

Now you could have a fuse in the power circuit and that would be a good idea because if it is not there, the transformer supplying the balanced power will be damaged if there is such a short. But you would want to have separate fused outlets for each unit in use so that anything running on the balanced power would have protection for the user.

I've looked at several balanced power products and not been able to see any such fuses (which would have to be selected by the user) which suggests to me that they could be dangerous to use.