jbhiller
Responses from jbhiller
| Is the Audio Technica AT-ART 9 cartridge versus a Dynavector 20XH Thanks tablejockey! This only increases my curiosity! | |
| New Technics SL 1200 GAE Thanks for following up. You make some fair and subjective viewpoints. I can see the issue with the design, but for me it is not one. I can't comment on what most audiophiles would do with the stock tonearm. I can say that giving the tonearm a r... | |
| New Technics SL 1200 GAE @Chakster, Why is the ToneAudio review of the 1200 G useless? | |
| New Technics SL 1200 GAE Lowering the torque has definitely opened things up a good bit. I highly recommend adjusting the torque to your ears/taste. I'm so glad I bought this table. | |
| When and how did you, if at all, realize vinyl is better? Thanks Greg! I agree. Keep them coming. | |
| Where do I set loading on my Manley Chinook? After much trial and error, I'm back to 50pf and 47kohms. Sounds the best. Manley could do a better job with manual. | |
| Technics Grand Class 1200 SL-GAE Yes. I needed to use the exact size mini flathead screwdriver--2mm--to make the adjustment. I have mine set very low, almost near it's lowest torque setting. I can see that it takes the record just a bit more time to get up to speed with this lo... | |
| New Technics SL 1200 GAE What a table! It's nice to be in love again. | |
| New Technics SL 1200 GAE I was able to get the switch over to manual, and set the torque fairly low, hopefully about 20% or 1/5 of its maximum. The sound certainly has more air yet I am still listening and fiddling. | |
| New Technics SL 1200 GAE I'm pretty handy but was surprised To find out that I had to use the exact size mini screwdriver as specified by the manual, 2 mm | |
| New Technics SL 1200 GAE @billstevenson and @audiofun I, too, own this marevlous piece of engineering. It sounds wonderful in addition to being way better built than many tables out there, especially in its price range. It's a rock. Here's my question--When I went to ad... | |
| Where do I set loading on my Manley Chinook? Thank you miner42! I think that'll email them. I think that I followed the manual and specs and did my best. sbank, I read that manual over and over. It doesn't really address bank 1 of switches--well, kind of. terribly written is the manual, i... | |
| Where do I set loading on my Manley Chinook? Okay, I made a change. I kept no. 1/Cart Cap at 50pFI moved no. 2/Resistor to 159 ohms, because the Dynavector site says the 20XH DC Resistance is "150 ohms". It sounds more lush, yet I've been confused before. Does this seem right? | |
| Technics Grand Class 1200 SL-GAE I would love to here that too, lancelock. I thought those were only available overseas or are difficult to nab. The only real problem with this piece is I could buy a bunch of carts and have them set up perfectly in separate headshells and just ... | |
| Audiogon Site Pop-Ups I am having the same issue! It is awful. I don't watch or surf the site on my iphone because of it. Such a shame. |