noromance
Responses from noromance
| Move your sub @miner42 https://www.youtube.com/watch?v=k3hRbm7KU1U | |
| Turntable upgrade recommendations, please. FWIW, there is an Agon member who reviewed your Denon. He replaced it with a Rega P2 and is happy with the upgrade. | |
| Dedicated 20 amp lines/should i use a sub panel Looks like I should expedite my plan to rewire the power cords on the power amps with new OFC cables including connecting the safety ground. I’ve been meaning to do it after changing the power cord on the preamp with very positive results. Thank you. | |
| Dedicated 20 amp lines/should i use a sub panel Jim,Thanks. Correct - that’s how I received it from the seller. Not sure if Stu R. originally did that or if it was the seller. As the REL is fine and grounded, the hum loop may be from the monos. I dunno. The Croft preamp has the safety ground in... | |
| Vintage automatic turntable recommendations? This might help. The Q Up.https://www.youtube.com/watch?v=Kcuq1iL6aKo | |
| Dedicated 20 amp lines/should i use a sub panel Jim,8/2 with ground. You are correct about the legs. I also tried it on both legs. So instead of 22, 24, where I originally connected it, I had tried it on 23, 24 but it still hummed. In fact, as it’s a basement space, I just ran in a 12/2 on 15A ... | |
| 401 birch or slate? I went with slate. See my Virtual Systems entry for update. | |
| Dedicated 20 amp lines/should i use a sub panel Jim, Some replies below.By side by side, do you mean the breakers are installed directly across from one another? Connected to the same main bus breaker tie. (Both are fed from the same leg, Line.) Or, do you mean one is installed above the other,... | |
| good integrated amps that don't include a phono section or a DAC Look at the tube amps by Jolida et al. Many have input volume controls and selectors - sort of quasi preamps. | |
| good integrated amps that don't include a phono section or a DAC Croft Integrated. Tube preamp so you can roll to your heart's content and MOSFETs in the amp for that good-old control of a solid state. | |
| SP10mk2: OMA Graphite plinth vs.Dobbins plinth Try Jim Campbell (ebay jec965). He built my birch-ply and 3" slate plinths. A lot less expensive than OMA. Check them out in my systems. (No affiliation) | |
| Dedicated 20 amp lines/should i use a sub panel I ran 2 x 20amp runs on 10 gauge from 2 side by side breakers for monoblocs. I ended up not using one of them because of a hum loop. Let us know how you get on. | |
| Help with an open circuit Quintet Black Soundsmith? | |
| Turntable upgrade recommendations, please. Look at the Anvil with a Jelco 750 arm (or their 850) | |
| Hum!! @stereo5 Nope. Dry. As in it has "dried" out over the years from not having the flux flow properly and cracked. Cold is a faulty solder joint from the start by not having the iron hot enough. I said connection instead of joint to help clarify in c... |