Does it make sense to use 6k$ Nos tube with 5K$ tube amplifier?
shkong78, I see, I didn't get this part. I thought your question was more general - is it worth spending $6k on those tubes ? I have no experience but I read that there was no real substitute for those original tubes. You confirm it. It is hard to assess the difference in percentage. 90% is like " not too far " or " quite close but.." ? Better this approach: best tube - 100 %, less than that - 0%. Very expensive approach. |
0-100% is subjective. Original Nos WE 300B tube is hard to get in good condition. Replica of WE 300B made 20 years ago is not Nos but some people misclaim it to be nos WE 300b. Original Nos WE 300A tube cost more than 300B (around 15K$ for pair). It is crazy. But their sound quality is special. One of my rich friend is using original 300A but I can not afford it. |
The original WE300B's last a VERY long time in amps designed to run that particular tube. I would check to make sure the LM amp is not running the tube hot like many current amps do to extract that little bit of extra power. I agree that original, engraved base 300B's are very good tubes. I think they run a bit more than $6,000 a pair for used tubes that still test strong. The 300A's are now more than $15,000 a pair. A local dealer uses engraved base 300B's in several amps that he builds and sells (in mostly pushpull amps, so this means quads of these tubes), and is currently looking for a couple of 300A's to complete a quad for a very special customer. I would look at the new Western Electric 300B's coming on the market that are being built using the old machinery and tooling from Western Electric. These are probably going to be like the 1990's Western Electric tubes--decent, if not quite as good as the originals. I have not listened to Taketsuke 300B's from Japan, but, they are reported to be good replicas of original 300B's. I heard, and liked, the Kron version of 300B's, but, they are different in sound from typical 300B's so some may not like them (leaner, more dynamic sounding than typical 300B's). If these seems really crazy, it is, but not as crazy as a tube that is similar to the 300A or 300B, which is the Western Electric 252. This same dealer has a 59B amp that runs those tubes in pushpull. The tubes really don't have a price on them because there is no market for them, but, he turned down an offer of $30,000 for the pair. |
Our collective perspective of value is wide ranging depending on personal interests, budgets and beliefs. There is no right answer...act in accordance with your own value paradigm. I'm not buying any $6K tubes any time soon but that doesn't mean it isn't the "right" move for you. We all prioritize our lives based on what we value. Very personal decision - not a committee or consensus decision for sure. |
Perhaps saving the expensive tubes for special events? For everyday listening I would use the modern tubes. Saving the expensive rare tubes for those few listening sessions with friends over to hear them? or when you really want to savor them.I bought a very expensive CD spinner, when I mainly use just as a DAC with cheap other D players. Saving the expensive 'part that wears out' for special occasions. Seems to be the best compromise. |
of all the current production 300b tubes I feel the Genalex gold lion to be the best overall sound. better then the Shuguaug Western Electric knock offs and they are more money. I've heard or run the Suguaug Treasures, WE's, Psavne (not sure which now) and the Gold lions in my amps and the gold lions are by far the best over all tube with much better detail and extension. If you have not tried a set of the Gold Lions I recommend you give them a try. As for your Western electrics the tube store has a set listed for $20k so they are going up to crazy prices now. Use them if you want as you have them now. save them if you want and try some new production tubes. I'm on my second set of gold lions and very happy with the sound, reliability and longevity they give. |
@
glennewdick Thanks for your recommendation of Golden Lion tubes. I have had a good experience of Psavne Acme 805. Thus I have a high expectation of Acme 300B tubes which I will get by this Friday. I will update the situation after auditioning it. Thomas |
I like Elizabeth's idea. Problem is that unless you are just playing background music at low volume, you will not settle for less after hearing better tubes. Still good idea, if you can get away with excellent $1k replicas and keep $10k originals for special occasions and mood, this might be an acceptable compromise. As for value, yes, very subjective and depends on personal finances. Frankly, it would be easier for me to pay $10k for a pair of tubes if I thought that there were no real substitute than for a cartridge or cable. In other words, it is not all that much after all ! |
Thomas, it seems to me it might be appropriate for you to try a few different sets of tubes that are being made currently. Takatsuki, EML XLS 300B (which I use and love in my Audio Assemblage SET 300B, purchased on auction here on Audiogon for $750, and had caps and resistors upgraded). Some might say I'm out of my mind using such expensive tubes in this amp, but I say they were absolutely worth it. A beautiful sounding amp. So, I would consider in lieu of spending tens of thousands, spend just hundreds (or in the case of the Takatsuki's, around $3000), and see if any of those would float your boat. I know of other SET 300B owners that are very happy with either the EML tubes or Takatsuki's. Anyway, that's my suggestion. I don't know if you have tried any of these tubes, but if you don't try, you'll never know. I hope you will be able to find what you are wanting, without spending such a large amount of cash. Best regards, Dan |
@islandmandan HI Dan Thanks a lot for your kind recommendation. I am going to see what happen to Acme 300B tube. By the way please make sure to join the party at my home on March 16th. best wishes Thomas |
Summary of improvement on LM 508 1. Acme 805 (740$ well worth it) 2. 1944 Sylvania vt231 (125$ fantastic value) I bought one pair at 100$ and so much I like it, I ordered one more pair from the same dealer at 125$ as backup. He does not have them any more. Two pairs sound almost alike with 125$ pair very slight more details. 3. NOS WE 300B ( tight bass, wider soundstage, fantastic details but expensive and hard to get) 4. NOS Mullard ECC35(125$ from Ebay well worth it) 5. Synergistic Blue power cable( make sound faster and transparent) 6. Synergistci Blue fuse( make sound more refined , subtle effect) 7. Isoacoustics Orea Bordeaux ( subtle effect, more focused sound) No1. has the most effect and No7 has only subtle effect. |
I don't know if it is that good an idea to go swapping tubes in and out for special occasions vs. regular listening. Tube sockets have a somewhat limited life, as far as insertions and removals, so frequent swapping means shortening the useful life of the socket. An old timer said that beyond thirty cycles, most tube sockets become dicey. I agree with the mention above about EML XLS 300B tubes. Those are nice tubes, albeit not that cheap. |
I am sure fancy sockets are available, but, I know builders who are particular about the sockets they like and the ones they like are vintage sockets. The sockets can be tightened up, but they supposedly don't stand up to frequent re-tensioning. Also, not everyone is up to doing socket replacement. I know I would be less than thrilled to do that with my Audio Note Kageki because the sockets are on the circuit board. I also don't like the fact that triodes like the 300B and 2a3 have four pins and no center key, so it actually is possible to jam them in the wrong way; the pins vary in size, but, that is really not enough to prevent an accident. With all the great minds at Western Electric, why didn't they think of putting the pins in a different pattern, like a trapezoid, where incorrect insertion is impossible. |
I suspect you were not as determined to screw up as some of us are. At a local shop that employs part-time high school students, one such employee managed to insert one of a "matched pair" of Western Electric 300B's the wrong way, the result being a no longer matched pair and almost ceaseless teasing of that employee (amusing because he is otherwise super bright and has gone on to designing and building quite a number of decent amps, linestages, headphone amps and DACs). |
The new reissue of the Western Electric tube has not been on the market long enough to establish its quality and reliability. The good news is that the company not only bought the trademark for Western Electric, they also bought the tube making gear and already built parts, so if we are lucky, their tubes will be like the 1990's reissued tubes. I thought those reissued tubes were quite good-decent sounding and very reliable (only quality control issue I knew of was that some glass envelops became unglued from the tube base (relatively easy to fix if wires remained intact). It would also be nice if they got around to reissuing other WE tube types. How about new 310, 348, 349 and 350 tubes? |
just run these if you want the best sound. https://www.tubedepot.com/products/nos-western-electric-engraved-base-300b-black-plate-late-1930-s-m... |
I don't quite know what point is being made, but, quoting a fictional character as evidence that some people are delusional is quite amusing. Also, what is wrong with being deluded into being happy about a purchase choice? To also utilize a pop fiction reference: I don't see anything wrong with taking the blue pill. |
