2. analog
  3. 1325551242

Eminent Technology ET-2 Tonearm Owners


Where are you? What mods have you done ?

I have been using these ET2's for over 9 years now.
I am still figuring them out and learning from them. They can be modified in so many ways. Bruce Thigpen laid down the GENIUS behind this tonearm over 20 years ago. Some of you have owned them for over 20 years !

Tell us your secrets.

New owners – what questions do you have ?

We may even be able to coax Bruce to post here. :^)

There are so many modifications that can be done.

Dressing of the wire with this arm is critical to get optimum sonics along with proper counterweight setup.

Let me start it off.

Please tell us what you have found to be the best wire for the ET-2 tonearm ? One that is pliable/doesn’t crink or curl. Whats the best way of dressing it so it doesn’t impact the arm. Through the spindle - Over the manifold - Below manifold ? What have you come up with ?
128x128ct0517
ct0517's avatar
ct0517 OP
1,798 posts
 
Timeltel
“The 412s response is similar to the 420 but with more apparency in the mids”

In a moment of weakness last night I decided to buy another crack jack box and see if a prize existed inside. I picked up a 412. I am curious how it will react with my other ET2 being set up to feed WPK Quad 57’s. One midrange apparent cartridge feeding very midrange apparent speakers ? Is it too much of a good thing ? I could not resist giving it a try for $49 euros.

Timeltel – I always enjoy and value your posts on the MM thread. Thx for contributing here.
frogman
4,637 posts
 
I look forward to your impressions of the 412, Chris. Actually, I have been seriously considering buying a 415 on the assumption (perhaps mistaken) that the body/motor of the 415 is the same as for the 420. I would like to experiment with fashioning a different (wood or...), non-plastic mount/ shell for the 420, and don't want to risk damaging mine. If anyone has definitive (or simply educated) information about the motors of the the various Acutex(i) please chime in.
acman3
2,267 posts
 
The Acutex 412,415 and 420 STR are definitely interchangeable.I have listened today to the Acutex 412 and 420 on the same motor.
frogman
4,637 posts
 
Thanks Acman, I just ordered a 412.
lewm
6,770 posts
 
Guys, I was under the impression that the MM cognoscenti had rapidly moved past the Acutex 420, following its appearance and then disappearance in the market place. I know that Raul was not enchanted by it and seemed to far prefer his "blunt nose" 3XX series Acutex, which he likes even better than the late pointy 3XX series. Do these posts represent a renaissance of the STR420? I caved in and bought one too, from Italy. It still rests in its original box, because of the underwhelming remarks made on the MM thread. Was going to sell it, once I can overcome my inertia.

Has any Acutex-ian tried the Saturn V headshell? It may not fit the 4XX series; it was made for the late 3XX series.
More to discover