Stillpoint Ultras anyone?

Glaucon is smart. In a similar vein, I put four aluminum ultras under my Modwright 5400es, but then added a 5th ultra SS under the transport area....it added to the goodness...more solid imaging with more palpable bass all the way around. Best to experiment and add stuff to the equation. More is better in this regard.

Podeschi, do you have the Ultras pointing up or down? Are they directly in contact with the component or shelf, or are you screwing them into risers? I've done a little experimenting, and I find they work best pointing down, and screwed into the component stands.

Also, are the SS Ultras significantly better than the AL Ultras?

Glaucon, yes the Ultra SSs are better than the AL versions. I directly compared them. You would never consider buying the AL once you heard the SSs, unless your supper would not exist were you to buy the SSs. The SSs obsolete all prior isolation. The ALs do not.

But the SSs now are obsoleted again by StillPoints. The Ultra Fives are hideously expenses at $650 each! But under a $10k turn table they allow it to sound like a $40,000 turntable. In fact I have heard a $150,000 turntable that was very good but nowhere near what I heard with them under my tt.

Glaucon,
I tried it both ways -- actually bought the inserts to match threads on Sony 5400 and CJ amp. First screwed in (with a gap between bottom of Stillpoint and bottom of Sony) with tophat facing down sitting on Symposium shelf. Then reversed them and placed the tophats directly underneath the CJ and Modwright, but deeper inside from where stock footers sit. I found this to sound better. Spoke to Stillpoints customer service and they confirmed sometimes it does sound better to have stillpoints sitting hardhat up under critical areas of the component (e.g.., where power supplies are). So on Modwright 5400 I have 4 Stillpoints Ultra AL sitting hardhat up directly coupled to chassis. Fifth SS Ultra sounds better with fat base under transport area and hardhat sitting on symposium shelf. For my Clearaudio Innovation Wood table, I screwed the Stillpoint Ultra SS fat base side into the table, smaller end of ultra into the optional base, which sits on symposium Ultra shelf. I'm so impressed I plan on buying the Ultra 5s for the turntable, and will move the Ultra SS under some Magico speakers I plan on buying. Cheers

Podeschi, you will be awed by the Ultra Fives under the turntable. I must say that four or clearly better than three if you make certain that all four are engaged with the component. I had the advantage of having those under the tt screwed into a StillPoints Component stand. Since there are no height adjustments on the Ultra Fives, you need a flat bottom to your tt.

I have heard that the Ultra Fives are clearly better than the Magico QPods even under Magico speakers.