Any DIYer s out there ?


I know from reading some of the posts that there are other "DIYer's" out there. For those that don't know what "DIY" means, it is an acronym for "Do It Yourself". I'm particularly interested in knowing what you folks have built or modified. You can go into as much or little detail as you like. Since i started the thread, i'll do the first post.

I started off by trying several different "homebrew" speaker cables. From there, i went into building interconnects and then power cords. Somewhere along the way, things got more serious and i began to tear into existing designs and "make them better". I've modified a couple dozen sets of speakers, built and desiged speakers from scratch, modified amps and am even building one from "accumulated parts". I've also built sound absorption panels and bass traps courtesy of Jon Risch's website.

I've continued doing this as i find great pleasure in knowing that i helped contribute to the enjoyment of both my system and several others in a "special" way other than just by assembling the various components. It also keeps me out of trouble and minimizes cash outlay for "manufactured" goodies. After all, what one can buy for $1 can be made for $0.25 to $0.60 and be done MUCH better.

Anybody else like doing this kind of stuff ? Don't be shy or modest. Tinkerer's are welcome and PLEASE, go in to detail about your favorite "projects". Sean
>
sean
Rmgcy, I assume you built the zen or son of zen pass amp. Where did you get the monster power 8 ohm resistors and the high current power transformer? I am considering builting the son of zen and I even have the heatsinks, power supply electrolytics (200,000 microfarads worth) and mosfets. But, oh boy, finding the power resistors and transformer for a 25 watt version is murder.
Liguy: Yes, one of the amps that I built is the "Zen" with the improved power supply. I must waited over a year for the 2 output transistors to arrive after ordering them. Other than the transformer and the MOSFET, I got all the other parts at very little cost from the swap meet - a monthly parking lot event. It's unbelieveable how hot this amp can get and so the heat sinks has been quadrupled ever since so that the originally installed fan would not come on so quickly. I think I'll hold off building the "Son of Zen" until this California energy crisis is over!!
I recently built an amp using Amplimo modules. Two years ago, I built a Marchand cross-over kit. In my youth I built dynacos and heath kits. I have also built several speaker systems that all exceeded my expectations, that I continue to use. Currently, I am ressurecting a "Daniel" pre-amp that had been reduced to a bag of parts. I would like to build a "pre pre-amp" for a moving coil cartridge but have yet to find a suitable circuit. It is great fun!
Sean, I noticed in another post that you are an EE. I am also but the twist in my case was the degree was an attempt to understand the reproduction of music. To that end EVERY part of my system has the DIY touch. BTW I had a Pass A40 for a few hours untill it over heated!!!
Rjf, a long time ago I built a Marshal Leach pre-pre amp. It was battery powered and was quite good. Dr. Leach has a web site and I think the schematic is still on it. I also had a Daniel. I can clearly remember how good Cat sounded with that rig even though it was so long ago.

Chris