Any DIYer s out there ?

Liguy: Yes, one of the amps that I built is the "Zen" with the improved power supply. I must waited over a year for the 2 output transistors to arrive after ordering them. Other than the transformer and the MOSFET, I got all the other parts at very little cost from the swap meet - a monthly parking lot event. It's unbelieveable how hot this amp can get and so the heat sinks has been quadrupled ever since so that the originally installed fan would not come on so quickly. I think I'll hold off building the "Son of Zen" until this California energy crisis is over!!

I recently built an amp using Amplimo modules. Two years ago, I built a Marchand cross-over kit. In my youth I built dynacos and heath kits. I have also built several speaker systems that all exceeded my expectations, that I continue to use. Currently, I am ressurecting a "Daniel" pre-amp that had been reduced to a bag of parts. I would like to build a "pre pre-amp" for a moving coil cartridge but have yet to find a suitable circuit. It is great fun!

Sean, I noticed in another post that you are an EE. I am also but the twist in my case was the degree was an attempt to understand the reproduction of music. To that end EVERY part of my system has the DIY touch. BTW I had a Pass A40 for a few hours untill it over heated!!!

Rjf, a long time ago I built a Marshal Leach pre-pre amp. It was battery powered and was quite good. Dr. Leach has a web site and I think the schematic is still on it. I also had a Daniel. I can clearly remember how good Cat sounded with that rig even though it was so long ago.

Chris

Great thread! I have been DIYing everything I have owned for years! As an Electrical Engineer, I have discovered that virtually every component or speaker can be improved regardless of price. For example; Dunlay speakers : change out the Inductors, Capacitors and Resistors with quality parts (from Northcreek for instance). And by all means use impedance compensating networks across the drivers! With these improvements, these speakers are DRAMATICALY improved. Why more high end speakers don't use zobel network across each driver is a mystery to me. This is a no brainer mod for any speaker that does not have them , and most do not. Amplifiers: use black gate capacitors in the power supply, parallel high quality film caps across each and every fuse (except power supplies), and for the more advanced, rebuild the front end and output stages (non tube designs) with better transisitors which have high slew rates, fast settling times and symetrical distortion characteristics. Also, make sure that all transistors use active FET current sourcing (as compared to the resistor passive sourcing on the transistor leg). For example; Aragon amplifiers will dramaticaly improve with this mod. The cost? $12.00! Cables: build your own, save a fortune, and learn to detest those stupidly expensive "recomended" brands. My favorite? Stan Warrens T1 design (He can also build these for you at a very resonable price, if you don't want the hassle). These cables are way, way up there sonically, and have NO identifying signature, as compared to many other super expensive brands. Cd players and DACs; Strip out the output devices and replace them with a real output stage. Again if this is too much for you, Stan Warren is a great source, for this kind of mod (along with digital filter and power supply enhancements). In the end, DIYing will give you sound improvements that YOU CANNOT BUY, FOR ANY PRICE! I and others have examined quite a bit of the high end stuff out there, and unfortunately, it seems as if every "audiophile" manufacturer somehow misses the boat, with his design execution. Ironicaly, the above modifications that I have breifly described are NOT advanced thinking!. They are basic improvements that any competant engineer should utilize. Yet so many of the big name companies don't! (I wish this wasn't the case , I am fortunate enough to afford some of the more exotic stuff, and really don't have the time to do the above mods. Sometimes it takes me over a year to finally finish some of the more advanced DIY projects). For the rest of you who just want to save money, the above DIY recomendations will make you think twice about spending stupid money on high end gear. I'm sorry to say that most of the so called "high end" companies, are NOT the gestalt, that everyone seems to think they are. Have fun DIYing, learn to love music (not equipment), and save that money for your kids college education. If you don't have kids, spend your savings on more pizza, cars, beer and women! (Not necessarily in that order...Ha!)