Cable elevators

I recently made some from a long 3" x 3" Elm plank. cut V groves along the length, then cut the thing into 3" blocks. I hear absolutely no difference, but they really do tidy things up nicely, and for that alone, it was worth the effort.

For less than $2 a piece I use ceramic light sockets with the terminals removed. 

Thanks to everyone that responded and provided some good comments, ideas and a few laughs! Much appreciated. When all is said and done, I will probably end up either making them myself primarily to make the cables look neat; whether or not it has any effect on the sound. Cheers

I think I've said it elsewhere in one of the forums, but it's worth repeating.  
Try granola bars, original oats & honey in the green box work best, with 1/2" layers of Jif peanut butter in between, 6 pieces high placed perpendicular underneath the speaker wire every 24".  If you don't hear a difference go to 20" apart and then if still no difference, go in 2" increments until the sound just blooms with clarity.  When you hit the right point, you will know it, it will hit you like a ton of bricks - the sound will just open up 3 dimensionally.  It's kind of like setting up a Vandersteen speaker or planars/electrostatic speakers.   The speaker/speaker wire connection seems to dictate how far apart the granola bar/PB spkr wire lift has to be.  Generally, I've noticed bookshelf speakers can use less granola but floor standers need more granola.  

This is the most amazing tweak ever!   

In general, you should not spend a lot of time rubbing your cables on a wool carpet.

If you think a significant static charge will accumulate from the cables simply sitting on the carpet... uhmm.. static sitting... then there is a problem and it is not in your cables.

As a fun test, why not see if the SQ  is affected when a Defibrillator is hooked up to the outside of the cables?

or shoot a Taser at them while listening.