Power Cables and Power Conditioner


I bought my first PS Audio (PSA) outlet as well as a PSA power cable.  I had intended to use the power cable to go from the new wall outlet to the conditioner but when I got home I realized the Furman ELITE-15 DMi has a fixed power cable.  I thought dang it and was going to return the PSA cable but then decided to give it a try.  So I ran the PSA cable from the Furman to my Rogue Audio Preamp.  I swear I think there was a moderate improvement to the overall image.  But of course this could be placebo and I have not done a bunch of with/without listening but am happy so far.


I assume the Furman filter is doing its job and adding the PSA power cord to the Pre is preserving this current as best it can. I would like to add another cord for the DAC and the power amp. But thought I would float this probe to see what other people do in similar situations as this.
128x128jbuhl
OK thanks Lowrider.  I think if I do the power I could go a short distance outside the house and then into the crawl space.

Regarding the amp not being plugged into the PC.  I have read that on here before.  So do people just sacrifice the amp in case they get a surge?
So do people just sacrifice the amp in case they get a surge?
Some people have surge protection for the amp located at the breaker box. I plug my amp into a professional grade power strip which does not limit current.
This Furman is the type used by musicians on stage to power their gear. To my ears, it seems completely transparent and protects against RF and EMI.
https://www.amazon.com/Furman-SS6B-Plug-Surge-Protector/dp/B0002D017M/ref=sr_1_1?ie=UTF8&qid=149...

Jbuhl

When I moved from a home with crappy power to one with good power, my PS Audio regenerator displayed steady voltage and low distortion. I ditched the regenerator and could not be happier.

If your power is clean as you have mentioned (measured?), then how about power outages, lightning, etc.? If all is good, then I would minimize what to throw at your system, but a dedicated circuit(s) is always good for other internal issues. If your power turns out to be crappy, create an "overall" plan of attack based on the circumstances. However, if you live in an apartment, for example, so you can't do much about it, then a fine conditioner may be a good solution.
Kenny
I'm with Kenny - I had a power conditioner, but found things got much better with good power cables and a power distribution box that had no filtration - just a breaker for safety and some very good outlets on the back. I also plug the amp directly into the outlet, not the distribution box.

A dedicated line with MRI outlets across the board with good power cables into each component is one way to ensure there is little to no noise spread from one component to any other.

Good power cables will actually reduce the effect of digital equipment has on overall sound quality

If there is a thunderstorm - I power down and remove all plugs.
 
Very few conditioners protect against a ground strike, which actually are the more common occurrence and lifts the voltage potential of the ground and neutral wires to insane levels. So you think you are protected when in fact you are not

My neighbor had this happen and it wiped out everything that he thought was protected - than goodness for house insurance!

Regards - Steve

I myself previously used an Ayre filter plus an PS Audio regenerator.  I also used Shunyata power cords.  Several years ago I changed to Audioquest power cords as I found them much superior to Shunyata.  I found that between the Ayre and Ps Audio power conditioners that certain audio products would work better in one verses the other.  That one had to match the audio product to the power conditioner itself for best results.  Possibly like finding the right phono preamp for a paticular cartridge I would imagine.  A few months I traded the Ayre filter and Ps Audio regenerator for two Audioquest Niagra's 1000's.  They are the $1000 strips.  Now the overall audio reproduction is truly excellent overall.  For the cost I can recommend using an Audioquest power cable-power conditioner combination fully.