2. amps-preamps
  3. 134869-33771

Who has Luv for the Lyngdorf 2170 and is thinking about the 3400.

Hello All,
I’m coming up on 40 yrs in this hobby,and or obsession of ours,and I started with a pair of Khorns and Macintosh at the age of 12 and Offcourse owned a ton of different gear over the yrs.
I bought a 2170 a little more than 6 months ago and I enjoyed it so much that I quickly realized I don’t really need anything else,solid state,tubes,or even dac’s anymore.I could step off that silly merry go round of amplification and just enjoy music.I was able to utilize the extra money and time and put together a really great sounding network audio system that rivaled the best in analog that I have ever had,I was mainly a analog guy all of these yrs but finally gave it up,I even sold my longtime record collection of 3k records which included many Hot Stampers that I purchased and also several that I found on my own.

So who Luv’s the 2170 and is maybe also thinking about the new 3400.

Happy Listening,
Kenny.

kdude66
uberwaltz's avatar
Ag insider logo xs@2x
uberwaltz
4,946 posts
 
Interesting.
If mine came with a Lyngdorf usb driver I did not see it and certainly did not use it.
Pretty old 1g drive I had lying around in the computer desk drawer.
Not really sure what might be going on with that.
kdude66 OP
1,198 posts
 
I updated my 2170 to the latest firmware,135a,but I don’t recall exactly how I accomplished this.It’s been several months,I just keep messing with it till it finally did load up.
I believe the latest firmware mostly just added some new voicings,which are the preset equalizer settings,which I don’t use anyway.

With my dedicated computer which is the main piece in my digital front end,I don’t use Lyngdorf’s usb software plugin,I have no need for it because I’m networked with Ethernet until the last step and I use the Sotm ultra 200 renderer,which converts and reclocks into a Usb format and then connects to my Lyngdorf via usb cable.

I’m glad to read that it’s working out for you.

Kenny.
nicks25
20 posts
 
@robelvick 

Make sue that the Lyngdorf firmware files are the only files on the USB drive.  That worked the first time for me.

Nick
robelvick's avatar
robelvick
466 posts
 
Nick,

I will double check to make sure nothing else in on the USB stick. 

I believe I put the entire folder on the USB,  including the readme. doc.  

Is that the proper way??
robelvick's avatar
robelvick
466 posts
 
Figured it out.  Uploading the entire folder was the problem.  I took out the readme.doc and it worked first try.
More to discover