Perfect Path Technologies: Omega E mat

In order to paste the entire chassis one would need a tub of TC🙂 I pasted my breaker panel door and used almost 1/2 a container. I would use a whole one or more to cover my BPT conditioner.  

tuffy ...

Yes, paste everything inside including the sides of the receptacles (plugs), wires, connections, Caps, AND the inside of the chassis including the inside of the cover.

It took an entire tube of TC to do my six-outlet power conditioner. For the price of one tube of Total Contact, if your results are the same as mine, you'll be getting a $10,000 upgrade to your system. No joke. 

These results were attained right off the bat ... as soon as I put the power conditioner back together. It was a VERY significant improvement. With that in mind, remember that there is a curing process for the Total Contact, with jumps in SQ at four weeks, and another big one at eight weeks.

I can  hardly wait. 

Frank

@oregonpapa How do you undo the hex screws from the Sound Application conditioner.

Mine seems to be stuck and hardly turn, afraid they will get damaged or stripped?

Thanks

Hey.... I cheated and asked Timmy. He said wick a little bit of lubricant, either silicone, PB Blaster or WD 40....you just have to be careful because petroleum based lubricants will attack rubber and some plastics. With that said, lightly spray little short blasts, the cap head screw will suck it in a tiny bit. Let it sit for one to two days, and it should break away, no problem-o. <3 Krissy & Timmy

Hi,

WD40 works well for rusted or gunk seized treads, but my real concern is if the units screw threads where intentionally thread locked or threads possible flatted to tamper proof the unit and keep prying hands out.

The force needed does seem like the hex head may "round" if further force was used.

Just wondering how and where inside the unit could paint some Total contact.

Thanks