ff
- ...
- 774 posts total
For the gut with the Bryston 4BSST2 and 24’ long cables: You are not doing well. The Bryston 4BSST2 http://www.bryston.com/PDF/Manuals/300006[3B4B].pdf have a DF of 500. You need a 3x0 AWG! it may be expensive... You better get closer, as 8’ and use a single 0 AWG. An other option, is to used two monoblocks and a shoer (3’) of a 4 AWG cable. |
Mr. sleepwalker65 your math is wrong. The cable is fighting the power (P) or the current (I). I used Klipsh speakers (8 ohms) with 99dB/w/m SPL with a Caver 250W amp. that played at 0.001W-1W as loud as it should and still a thicker cable improved sound! The coin been lost under the Damping Factor (DF) parameter. The higher that is, the thicker the cable you need. It is about controling the speaker, not doing a welding, towing a truck or any other idea you were throwing as you thought it is funny. |
- 774 posts total